Your digital scale may show an error message or an inaccurate reading if the unit is overloaded. Each scale has a maximum weight capacity, so if the user weighs more than the maximum, the scale is unable to provide a weight. If you receive an “EE” error or “Error 2” on the display, you’ve exceeded the maximum weight.

How do you fix a weight scale error?

1. Remove old batteries from the back of the scale.
2. Insert 4 new AA batteries. The scale manufacturer recommends using Duracell batteries.
3. Wake the scale before weighing in again.
4. Once you’ve weighed in, the scale should display “sent”.
5. Navigate to your Progress Page to view your weight chart.

What is Error 1 on a Taylor scale?

Error 1: Instability (scale is on an uneven surface ex: carpet) Error 2: Unit may have been jarred or unit was overloaded (customer went over the maximum weight capacity) Error 3: Contact error (Feet were not wet for Body fat reading, feet aren’t big enough to reach sensors)

How do you fix a Taylor Digital scale?

1. Remove the battery from the scale.
2. Set the scale on the floor (no carpet) without the battery in place.
3. Stand on the scale for 10 seconds (still without the battery).
4. Carefully replace the battery without pressing any buttons or activating the scale.

How do I reset my Taylor kitchen scale?

Press the tare button and the scale will reset to zero. If you want to weigh more than one food in the same bowl, add the food, hit tare, and the readout goes to zero. You can then weigh the additional foods in the same bowl, just getting the weight of that additional food.

Why is my digital scale not working?

Battery problems are often the cause behind digital scale display and function issues. … Use a small, clean paintbrush or cotton swab to sweep the compartment free of dust or debris that might interfere with the battery connection. If that doesn’t solve the problem, try replacing the batteries with fresh ones.

How do you tell if your scale is broken?

1. Inconsistent Scale Readings: …
2. Inaccurate Readings Between Scales: …
3. Unstable Readings: …
4. Display Readability: …
5. Rust or Other Corrosive Damage:

How do you pair Taylor scale?

it will find the scale this way but will ask for a PIN number…and there’s not one. Instead, turn on the bluetooth, open the Taylor app, touch the “wheel” in the upper right corner, and add the device. Once you’ve created an account and have it paired, make sure the app is opened and step on the scale.

What does unset mean on a digital scale?

UNST means the scale’s internal components are unstable. Please follow the reset procedure listed and that should resolve the issue your are experiencing. 1. Remove batteries from the scale.

How do you zero a Taylor Digital scale?

With one foot only, place just enough weight on the scale for the display shows zero’s or dashes. Once you see zeros or dashes remove your foot. Wait for the scale to turn off again.

Article first time published on

How do I reset my digital food scale?

Answer: While your container is on top of this digital food scale, you just have to press the power/tare button once and it’ll reset to zero, then you can add more stuff in food scale. For measurements in grams, you can turn on the scale switch and look at the position in the upper right corner of the display.

How do you set Taylor scale to grams?

1. Place the scale on a hard, level surface.
2. Press the “ON/OFF” button to turn the scale on. The display first shows. …
3. Your scale is set at the factory to weigh in ounces. To switch to grams, …
4. Place the item to be weighed on the center of the platform. …
5. The scale will turn off automatically after 1½ minutes of non-use.

Can you calibrate a digital scale?

Calibrating your digital scale is the best way to prolong the scale’s quality and overall lifetime. It only takes a few minutes, and when done correctly, guarantees the measurements you are taking are accurate each and every time.

Can you gain 5 pounds in a day?

Daily weight fluctuation is normal. The average adult’s weight fluctuates up to 5 or 6 pounds per day. It all comes down to what and when you eat, drink, exercise, and even sleep. Read on to learn more about how these factors affect the scale and when to weigh yourself for the most accurate results.

Can a digital scale be wrong?

Sure, the human body fluctuates over the course of the day and there are some crappy scales out there, but even relatively good scales can seem to be wildly inaccurate. … In general, digital bathroom scales are more accurate than mechanical ones.

Do digital scales remember your weight?

Your scale does not store weight measurement. It should recalibrate to 0.0 lbs for next weight measurement.

Can you reset digital scales?

The button to set the digital scale to zero is normally the power button, but it can have various names such as “zero”, “tare” or “reset”. Most digital scales are factory set to auto shut off after a period of inactivity.

How do I reset my electric weight machine?

1. Remove all batteries from the back of your scale.
2. Leave the scale without its batteries for at least 10 minutes.
3. Make sure that the battery compartment is clean, and the contact terminals are free of debris or residue. …
4. Place your scale on a flat and completely even surface.

What is the proper way to weigh yourself?

1. Place your scale on a hard, even surface—no carpeting. A wobbly or tilted scale can result in an inaccurate reading.
2. Stand still, with your weight distributed evenly on both feet. If you’re using a body-fat scale, you should be barefoot.

How can I weigh myself without a scale?

1. One Good Ol’ Measuring Tape. …
2. Body Fat Calipers. …
3. Try On Old Clothes. …
4. Before and After Photos. …
5. Keep a Food Diary. …
6. Water Displacement/Archimedes Principle. …
7. Fulcrum / See-Saw Method. …
8. Bioelectrical Impedance Analysis (BIA)

Why does my digital scale say Unsr?

You need to recalibrate before weighing.

What does out2 mean on a scale?

My screen says “out2” or “our2”. What does this mean? This particular error code means that your scale needs to be calibrated using the required calibration weight for that particular scale model. Follow the step-by-step instructions for calibration included in your user manual to properly calibrate your scale.

How do I reset my digital pocket scale?

Reset unit by pressing ON/OFF button and wait until “0.0” is shown. 2. Press and hold UNITS button for 3 seconds until “CAL” is displayed.

What does C mean on scale?

What is meant by the message “C” on the scale display? A “C” will appear during the first weighing, this is a self-calibrating feature on some scales. It means the scale is re-calibrating to zero. Please re-weigh for accurate reading.

How do you calibrate a digital food scale?

1. Step 1 – Switch It On. Start off by switching on your digital scale. …
2. Step 2 – Refer to the Instruction Manual. Any digital scale will have a number of buttons, one of which is intended for calibrating it. …
3. Step 3 – Press the Button. …
4. Step 4 – Place the Calibration Weight.

What button should you press on a digital scale to set the readout back to zero?

Pressing the Tare button (which is sometimes labeled ‘Zero’) will reset the displayed weight on the scale back to zero. The Tare button can also be used to measure multiple items in the same container. Simply add you first item, note the weight, press Tare and you are ready to weigh your next item.

How do you turn on a Taylor Food scale?

Place the scale on a hard, level surface. ” (power) button to turn the scale on. The display will show “-18:888” and then zero when it is ready for use. If the display does not show zero, wave your hand within 3 inches over the “TOUCHLESS TARE” symbol on the scale platform to reset the scale to zero.

Do Taylor scales weigh in grams?

The Taylor 3817 traveling diet scale scale has an 11 pound capacity with 0.1 ounce readability and can also weigh in grams. This kitchen scale is super compact and easy to use with two button operation and large display.

Why is my scale not accurate?

A scale can be affected by the surface it sits on. The best surface for a scale is a hard surface such as a flat bathroom or kitchen floor. It may be cushioned too much by carpet or other soft surfaces, which can make the scale off balance and give you inaccurate readings.

What coins to use to calibrate scales?

Other options are brand new U.S. pennies or nickels; a penny has a mass of exactly 2.500 grams, and a nickel has a mass of 5.000 grams. Place your chosen coin on the scale and read the output. If you placed a penny on the scale, you should read 2.500 grams.