Why does my RV water heater not ignite?
Why does my RV water heater not ignite?
If you are using the electric element most of the time, you may not notice a decrease in efficiency until at some point you don’t have electric available, and you find the heater won’t ignite. The following method will work well on most six and twelve gallon Atwood and Suburban RV water heaters.
How to light an electronic ignition water heater?
How Do You Light an Electronic Ignition Water Heater? 1 Locate the igniter button. 2 Press and hold down the button. 3 Listen for the click and ignition. 4 Locate the igniter button and knob. 5 Switch the knob to pilot.
What to look for when troubleshooting an RV water heater?
When RV water heater troubleshooting, check to verify the area near the water heater is cleaned out and free of debris. The final thing to look at is the flame. You will want to have a nice blue flame that is lighter in the center and not jumping around. If you are not getting spark you could have a bad electrode or other board issues.
What should I do if my water heater igniter does not work?
Click to remove this tagging. The igniters on water heaters tend to be extremely reliable, and if they fail they do not normally do so intermittently in my experience. Make sure the wire is connected at the bottom of the push button that makes the igniter spark.
What should spark gap be on gas water heater?
The spark gap is factory set (0.125″) and should be maintained. When troubleshooting lighting problems, it is recommended to test them first. Turn the gas OFF to the water heater and press the piezo igniter. Once pressed, the electrode should release the spark. Check if the wire connection is tightened correctly.
What kind of igniter board can I use in an RV?
I usually keep a spare Dinosaur UIB-S universal igniter board on hand that can be used as a replacement in many RV furnaces, water heaters, and refrigerators. I usually keep a spare Dinosaur UIB-S universal igniter board on hand that can be used as a replacement in many RV furnaces, water heaters, and refrigerators.
What to do if pilot light on water heater is not working?
If the pilot line is clogged, clean it or replace it. Faulty piezo igniter. The water heater uses the piezo igniter to light the main gas burner and when it is pressed down, it releases the electric spark.
