The Daily Pulse.

Your source for accurate, unbiased news and insightful analysis

environment

Why does my furnace keep making a clicking noise?

By Ava Hall |

Why does my furnace keep making a clicking noise?

Your furnace is most likely making a clicking noise due to your furnace’s spark igniter trying to ignite the pilot light/burners. A repeated clicking indicates a failure/system malfunction. This problem is especially troublesome when you are not getting heat at some point during the very cold winter months.

Why does my gas furnace make a clicking noise?

Clicking sounds are one noise you don’t want to hear. Clicking furnaces are more than a nuisance. Gas furnaces, especially, should be checked out by an HVAC professional for any clicking sound or other strange noise. Clicking from gas furnaces often indicates a problem with the gas valve or ignitor—and you certainly don’t want a gas leak.

Why do I hear a loud bang in my furnace?

If you hear a sound like a loud bang or boom coming from your furnace, you would certainly be wise to be concerned. One common cause of a loud bang, or boom, is a dirty burner in your furnace. Having dirty burners in your furnace can cause a delay in ignition. So the gas will build up instead of the gas igniting immediately.

What kind of noise does a furnace make?

All heating systems make some kind of noise. Radiators make knocking and hissing sounds, and even a small ductless system will hum a little. Furnaces will make a low hum or rumble while operating normally. Clicking sounds are one noise you don’t want to hear.

Why does my Furnace Run and then shut off?

If a gas furnace runs and then shuts off, or short cycles, this indicates an inconsistent flow of gas. An electrician should test the voltage at the gas meter, thermostat controls and the gas valve to locate the source of the problem.

Why does my furnace make a clicking noise?

Reasons a furnace might make a clicking noise includes: Loose inducer: Oil-powered furnaces use a motor-powered fan, or inducer, to push out smoke and fumes. Worn motor bearings: The bearings in the furnace’s motor will click when they become worn.

Why is furnace making a squealing, clicking, rattling noise?

Most Common Causes for a Loud Furnace (and How to Fix It) Rattling. If you can hear a rattling noise coming from the furnace, it could be that a panel or screw is loose. Screeching. If you’re hearing a loud screeching sound along with a rattle when you turn the furnace on, this could be the bearings in the blower motor, or the motor Clanking. Squealing. Banging. Squeaking. Whistling. Silence Your Loud Furnace.

What are the causes of clicking in an electric furnace?

Worn bearings can cause the motor to burn out, so a clicking noise from the blower motor is a sign to have your furnace professionally serviced. Blower fans in your furnace rotate on a main shaft that attaches to the motor, and, when this shaft becomes rusted or clogged with debris, it can also click while operating.

Is your furnace making too much noise?

If you hear your furnace making noise it could be a problem with the fan that cools down the furnace . This is caused by the fan bearings being worn out. So to be fixed the bearings will need to be replaced. If the loud noise happens only when the furnace starts to turn on then this problem is called “delayed ignition.”