Why does my battery have intermittent starting difficulty?

If the battery has an intermittent inter-cell connector problem, the voltage will drop to very close to zero yet if the key is released the voltage will mysteriously go to nearly a full charge condition or whatever it was when the ground cable was reattached as mentioned earlier. I hope this is helpful.

Why does my car not start after a new battery is installed?

Another reason as to why your car might not start after having a new battery installed is due to faulty fuses and ignition switches.

What should I do if my battery has no starting current?

If you have no starting current, check the “open circuit” (ground cable removed) from the battery and the voltage checked at the battery’s terminals. It will almost always be normal. Reconnect the ground cable and re-check the voltage.

If the battery has an intermittent inter-cell connector problem, the voltage will drop to very close to zero yet if the key is released the voltage will mysteriously go to nearly a full charge condition or whatever it was when the ground cable was reattached as mentioned earlier. I hope this is helpful.

What should I do if my battery won’t start?

You will need a basic multimeter for the job, and you have to first make sure to properly disconnect the battery, so that you can get an accurate reading. A load test might also be recommended, during which the electronic system should be started, and the battery’s output should be measured while it runs. Advance offers this service for free *.

When did car battery still won’t start?

This entry was originally posted on Wednesday, October 31st, 2012 at 10:00 am and is filed under Auto Repair . You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

Do you have to fully charge a battery for a load test?

For any load test to be accurate, the battery must be fully charged. Let’s use a motorcycle battery for an example: Remove the seat and expose the battery in your bike so that you have access to the terminals. Do not disconnect the battery because you will attempt to start the bike.