Why do propane fridges need to be level?

The fridge needs to be level so that the ammonia liquid falls from the condenser fins at the top of the refrigerator to the evaporator coils at the bottom.

How level does a propane refrigerator need to be?

As mentioned, gravity is critical to the RV refrigeration process. Without it the ammonia liquid will not properly flow to the evaporator coils to cool the refrigerator. Today, Norcold recommends that their refrigerators operate within 3 degrees off level side-to-side and 6 degrees off level front-to-back.

Why does a 3 way fridge need to be level?

The gas flow exchange cooling system requires the 3-way fridge to remain level at all times. Unlike compressor fridges, 3-way refrigerators are usually affected by the ambient temperature and cannot chill down to lower temperatures. They can only cool down to a certain level below the ambient temperature outside.

Is there a fault code for propane heater?

The fridge was on AC. Walking by the outside I smelled an electrical smell. It will not cool on AC anymore. The heater tube feels warm, but not hot to the touch. It seems to work fine on propane. No fault codes at all. Thank you.

Why does my propane refrigerator not ignite when not on auto?

If it tries to ignite on gas but fails when selected on auto and it works fine when not plugged into an outlet most likely there is a control board issue. It is not sending the correct signals based on what power source is selected.

Can you see the flame on a propane refrigerator?

If you can see the flame, make sure it is steady and not moving side to side or being pushed down. The flame should be straight up. Make sure there are no other restrictions around the burner as well. The problem with checking this is most of the time is you would have to pull the fridge out to remove the baffle and inspect the tube.

What does a fault code on a refrigerator mean?

Fault Codes. Fault Code Meaning. Corrective Actions. No display. DC voltage is unavailable to the refrigerator control panel or the refrigerator is OFF. – That the refrigerator is ON. – That the battery charging equipment of the vehicle is operational.

When to turn on RV refrigerator with propane?

Turn on your RV refrigerator probably 24 hours before the trip, this is because absorption refrigerators cool slower than compressor refrigerators. Start by putting in cold food first into the refrigerator, this will ensure that the cooling process will be gradual and the propane will not be overused.

The fridge was on AC. Walking by the outside I smelled an electrical smell. It will not cool on AC anymore. The heater tube feels warm, but not hot to the touch. It seems to work fine on propane. No fault codes at all. Thank you.

What happens when you replace propane cylinders in a refrigerator?

Anytime you refill and replace propane cylinders, air may become trapped in the gas lines, which may cause outages and reduced power. Purging air is easy, simply push and hold the Norcold’s on/off button to turn it off, then on again. Repeat it a few more times until all fault codes are cleared and the refrigerator ignites.

If it tries to ignite on gas but fails when selected on auto and it works fine when not plugged into an outlet most likely there is a control board issue. It is not sending the correct signals based on what power source is selected.