What year did the 460 get fuel injection?

1988
Following its 1983 reintroduction, the 460 received fuel injection for 1988; while remaining at 225 hp, the update significantly increased torque output; after further updates in 1992 and 1994, the final production version of the 460 produced 245 hp and 400 lb-ft of torque.

Is the Ford 460 fuel injected?

The new Pro-Flo 4 EFI System #35680 for Ford 429/460 engines is an advanced sequential-port electronic fuel injection for the 385-series big-blocks manufactured from 1968 through 1987….Specs.

How much horsepower does a fuel injected 460 have?

The Ford 460-cubic-inch, V8 engine has a cylinder bore of 4.36 inches and a crankshaft stroke of 3.85 inches. The output for 460 engines built before 1972 is 365 horsepower at 4,600 rpm and 485 pound-feet of torque at 2,800 rpm.

What year did Ford put fuel injection in trucks?

Ford first debuted their multi-port fuel injection on the 1983 1.6-liter Escorts and the 2.3-liter Mustangs and Thunderbirds. Multi-port or MFI became Ford’s standard fuel-injection system on all V-6 and V-8 engines in 1986.

Is a Ford 460 a good engine?

the 460 is a solid and reliable engine, even when making better than 1.5hp per cubic inch. they do have some issues, fuel economy(like that matters if you plan on building a 460) is one of them.

What kind of gas mileage does a Ford 460 get?

Registered. 14.3 mpg on the highway, 10-12 in town, anywhere from 7-12mpg while towing depending on load.

Is Ford 460 a good engine?

When did Ford stop making carbureted engines?

And while Ford switched most of its vehicles (even trucks) to fuel injection in the 1980s, they offered a carbureted version of the Crown Victoria P72 (the predecessor of the Police Interceptor) through the 1991 model year.

How many MPG does a 460 engine get?

The 460 engine from Ford is used in trucks and large cars like Lincolns. These engines are not fuel effecient, and some vehicles they are used in get less than 10 miles per gallon.

What’s the fuel pressure on a Ford 460?

I checked the fuel pressure on the 460 in my 93 F350 today. Key on, engine off, after cycling the switch about 8 times the pressure will get up to 30. Engine running it is about 32.

What kind of engine is a 460 engine?

The 460 engine I’m using to upgrade my 72 came out of a 90 model F-250. It ran but had numerous wiring issues with the fuel injection and other systems. Even though I was swapping the engine to an older truck i wanted to keep the modern convenience of fuel injection during the engine upgrade.

What kind of fuel injection does a Ford 429 use?

We can answer any of your tech inquiries! Edelbrock core products are made in the USA offering unsurpassed quality and performance. The new Pro-Flo 4 EFI System #35680 for Ford 429/460 engines is an advanced sequential-port electronic fuel injection for the 385-series big-blocks manufactured from 1968 through 1987.

Can a factory 460 engine be swapped with an EFI engine?

You can swap in a complete factory EFI 460 engine from a 1988-1997. If you already have a 460 that is still good you can take the heads and intake from the 88-97 and put them on any 460 engine. A 460 will even bolt up to the same bellhousing that a 351M or 400 will.

The 460 engine I’m using to upgrade my 72 came out of a 90 model F-250. It ran but had numerous wiring issues with the fuel injection and other systems. Even though I was swapping the engine to an older truck i wanted to keep the modern convenience of fuel injection during the engine upgrade.

Is the Ford 460 a pig at the pump?

The Ford 460 is in many ways a dinosaur; its huge displacement made for big power, but it also made Ford’s biggest of big-block engines an absolute pig at the pumps. However, there is some favorable news for those who want to have their 460 big-block and drive it, too.

We can answer any of your tech inquiries! Edelbrock core products are made in the USA offering unsurpassed quality and performance. The new Pro-Flo 4 EFI System #35680 for Ford 429/460 engines is an advanced sequential-port electronic fuel injection for the 385-series big-blocks manufactured from 1968 through 1987.

You can swap in a complete factory EFI 460 engine from a 1988-1997. If you already have a 460 that is still good you can take the heads and intake from the 88-97 and put them on any 460 engine. A 460 will even bolt up to the same bellhousing that a 351M or 400 will.