The Daily Pulse.

Your source for accurate, unbiased news and insightful analysis

technology

What would cause a speedometer to stop working?

By William Brown |

What would cause a speedometer to stop working?

The most common causes of a speedometer that stopped working include are a faulty speed sensor, a broken gear on the speedometer, damaged wiring, or a faulty engine control unit.

Does the speedometer have a fuse?

Anonymous. Your problem is NOT a fuse. The speedometer receives an electronic signal from an analogue transmitter mounted in the rear differential. It’s the little button in the rear diff with two wires attached to it.

Why is my bike speedometer not working?

Some motorcycles have electronic speedometers that require calibration and repair by a trained technician. Problems with mechanical speedometers are most often a faulty gauge or worn cable. If the gauge is not damaged, a simple troubleshooting procedure will isolate the problem.

How much does it cost to get a speedometer fixed?

The most common speedometer related issue is that which pertains to speed sensor failure. Most shops charge between $100-$250 for in-house speed sensor replacement.

Is it safe to drive with a broken speedometer?

It’s Never Okay To Drive With A Broken Speedometer You may be able to get away with driving with a broken speedometer. Yet, it’s never a good idea. If you have a broken speedometer, you want to get it fixed as soon as possible.

What to do if your speedometer doesn’t work?

Replacing the bad speed sensor will solve this issue. Also, if speedometer in your Chevy stops working or reads erratically, test the cruise control out. The cruise control uses the same sensors as your speedometer. If the cruise is working and the check engine light is on, the problem is likely with the speedometer itself.

How to troubleshoot a broken Kawasaki KLR speedometer?

TROUBLESHOOTING HINT: You can fake a dynamic speedometer test by . . . disconnecting lower speedometer cable, chuck cable end into drill set to turn COUNTERCLOCKWISE; make sure cable is inserted FULLY into speedometer at top. Rotate drill. Speedometer needle and odometer dials should move.

What do you use to lubricate a speedometer cable?

Lisle tools and the help auto parts brand make a gizmo that connects to the transmission side of the cable. It’s called a speedometer cable lubrication tool. It has a Zerk fitting that connects to any standard grease gun. This allows you to pump fresh lubricant up inside the cable. This can often solve problems but is not always successful.

Why does my odometer stop working on my Harley Davidson?

It’s located on the transmission just behind the rear pipe. A good quality gear lube will just about eliminate this problem. The magnetic speed sensor pick up gets fouled from the metal shavings in the transmission which causes the speedo to stop working and the directionals to stop self canceling because of no input to the ECM from the sensor.