What to know about the slide out room?

Always make sure that the slide-out room path is clear of people and objects before and during operation of the slide-out room. Always keep away from the slide rails when the room is being operated. The gear assembly may pinch or catch on loose clothing causing personal injury.

How do you retract a slide out room?

Retracting Slide-out Room 1. Verify the battery is fully charged and hooked up to the electrical system. 2. Press and hold the IN/OUT switch (Fig. 1) in the IN position (Fig. 1A) until the room is fully retracted and stops moving. 3. Release the switch. This will lock the room into position. NOTE: Only hold IN switch until room stops.

Why is there a leak in my slide out room?

This spring I discovered a small leak in one corner of the slide out room. Luckily it hadn’t had a chance to progress too far. Still, though, it had weakened a small area of the floorboard. I found the leak was caused by a small opening in the external silicone sealant.

What’s the best way to fix a slide out?

Use a wire brush to remove any debris, dirt, paint chippings or rust from your slide-out tracks. Clean out all the dirt and road debris from the tracks. Apply lubricant on the gears, tracks, and rails of your slide-outs. Try and retract and fully extend your slide-out a number of times. At this point, the squeaking sounds should have disappeared.

RETRACTING SLIDE-OUT ROOM 1. Verify the battery is fully charged and hooked up to the electrical system. 2. Press and hold the IN/OUT switch (Fig. 3 C ) in the IN position until the room is fully retracted and stops moving. 3. Release the switch.

How does the above floor slideout system work?

The Lippert Above Floor Slideout System is a rack and pinion style slide system. Utilizing a bi-directional electric motor to actuate the drive shaft, the slideout room is extended and retracted from the same source. The actuator has a built- in automatic braking feature.

Are there any problems with the slide out?

Most slide out problems are not that difficult to trace and then solve. There will be those that require the help of a professional technician to repair. The key would be to get to know your system and learn when the task is beyond your abilities to handle .

Use a wire brush to remove any debris, dirt, paint chippings or rust from your slide-out tracks. Clean out all the dirt and road debris from the tracks. Apply lubricant on the gears, tracks, and rails of your slide-outs. Try and retract and fully extend your slide-out a number of times. At this point, the squeaking sounds should have disappeared.