What to do before installing factory clearance lights?

First thing you need to do is cover your dash to keep shavings and stuff from falling into your interior. You have to take down the front of your headliner to access the area for the cab lights and to remove and install the harness.

How to install factory clearance light on F250?

Remove the plugs on the handle on the passenger side and then remove the (4) bolts holding the handle on…. required a 5/16″ socket. Once the handle is removed, pop the pillar cover off.

Can you install LED lights on the roof of a truck?

Climb up to the roof of your truck. If your car already has an existing apparatus on the roof, such as a rack or an antenna, you don’t need to remove these in order to install this LED roof light. You just need to install these LED Roof Cab Lights around it.

How do I install a light fixture on my roof?

If the roof eaves are enclosed with a horizontal soffit cover, you may need to install a short, horizontal support that is secured to the building wall at one end and to the inner face of the fascia or the rafter tail-end at the outer end. Your soffit light fixture will be in turn secured to this member.

First thing you need to do is cover your dash to keep shavings and stuff from falling into your interior. You have to take down the front of your headliner to access the area for the cab lights and to remove and install the harness.

If the roof eaves are enclosed with a horizontal soffit cover, you may need to install a short, horizontal support that is secured to the building wall at one end and to the inner face of the fascia or the rafter tail-end at the outer end. Your soffit light fixture will be in turn secured to this member.

How can I Fix my F250 factory clearance light?

Just tug on the plastic cover for the overhead console to pop it loose. It sounds like it’s breaking apart, but it’s just the clips coming loose. Leave the inner portion attached. You can work around it! There are two additional plastic clips that hold the headliner in the front.

How does Vince do a factory clearance light install?

Vince doing some final trimming on the lights for a good fit. The last thing to do was pop the harness rivets back in place, put the headliner back up, visors, pillars and final clean up. And getting all the grease pencil markings off the roof!