The Daily Pulse.

Your source for accurate, unbiased news and insightful analysis

science

What should my Dometic comfort control thermostat be?

By Emma Payne |

What should my Dometic comfort control thermostat be?

Dometic says these thermostats are accurate to +/- 5 degrees, which is abysmal. My experience is that they are usually within +/- 3 degrees (lousy). You will probably have to live with it if your thermostat is in this range. 1.

Why is my Dometic duo thermostat not working?

But such is not the case and here are some common Duo-Therm thermostat problems and their solutions: 1. The thermostat won’t stay on or turn on – the first place to look will be your on/off switch. If there is a crack in the solder making the connection, then no power will be sent to the switch.

What to do if your Dometic heater is not working?

Clearing communications issues: your unit can get into a situation where the thermostat is not communicating with one or both upper boards. Turn the thermostat off, and turn power to the AC units off and on. Then turn the thermostat on and see if it works better. 2. Reset the thermostat to factory specs.

How to reset Comfort Control Center 2 thermostat?

In order for the CCC 2 thermostat to recognize the system zones, type of units installed and their options, a system reset must be done. Once the system is completely installed, do a system reset. • Make sure the CCC 2 thermostat is in the OFF condition. See page 3, Quick reference to control buttons.

What to do if your Dometic thermostat is not working?

To fix this problem the first solution option you have is to do the system reset protocol. If that doesn’t fix the issue, then you have to trace the cable from the thermostat to the rooftop AC. Check both connections to make sure they are tight and once you unplug the cable, you will have to do a system reset.

Which is the best Dometic thermostat for camping?

Complete temperature control. The Dometic Multi-Zone Comfort Control Center Thermostat can control your Dometic heating and cooling appliances. Weather you are camping in the middle of winter or driving in the hot and humid conditions of the summer, this Dometic Atwood Thermostat is perfect control.

How to turn on Comfort Control Center 2 thermostat?

To turn ON the CCC 2 thermostat when the back light is off, first press any button to wake up the CCC 2 thermostat. Then press and release the ON/OFFbutton. The LCD will display the last programmed settings. To turn OFF the CCC 2 thermostat press the ON/OFF button and release.

Is the Dometic CT single zone thermostat dangerous?

WARNING This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to

Are there any problems with the Dometic duo therm control center?

This program will address the most common system problems associated with the Duo-Therm Comfort Control Center supplied by The Dometic Corporation. Our intent is to provide you with a guideline of checks to make, should you encounter one of the following symptoms. Clicking on the “REFER TO” section” number will bring up the appropriate section.

What should the ambient temperature be for a Dometic air conditioner?

The ambient temperature is above 52 °C. The roof air conditioner is only designed for ambient tempera- tures of up to 52 °C. The temperature set is higher than the room temperature. Select a lower temperature. The ambient temperature is below 16 °C. The roof air conditioner is only designed for ambient tempera- tures above 16 °C.

What should the resistance of a Dometic sensor be?

The sensors rarely go bad, but you can check the sensor with an ohmmeter. Unplug the sensor from the white plug on the upper board, and measure the resistance. The resistance should be about 7.2k at 70 degrees, 9.8k at 60 degrees, or 12.4k at 50 degrees.

Dometic says these thermostats are accurate to +/- 5 degrees, which is abysmal. My experience is that they are usually within +/- 3 degrees (lousy). You will probably have to live with it if your thermostat is in this range. 1.

The sensors rarely go bad, but you can check the sensor with an ohmmeter. Unplug the sensor from the white plug on the upper board, and measure the resistance. The resistance should be about 7.2k at 70 degrees, 9.8k at 60 degrees, or 12.4k at 50 degrees.

How to request manufacturer’s warranty for Dometic remote sensor kit?

Manufacturer’s warranty can be requested from customer service. Click here to make a request to customer service. Would you like to tell us about a lower price? What other items do customers buy after viewing this item?

What is the multi zone Comfort Control Center?

The Dometic Multi-Zone Comfort Control Center Thermostat can control your Dometic heating and cooling appliances. The Dometic Multi-Zone Comfort Control Center Thermostat can control your Dometic heating and cooling appliances.