What kind of horsepower does a Ford 460 have?

General Information. The Ford 460-cubic-inch, V8 engine has a cylinder bore of 4.36 inches and a crankshaft stroke of 3.85 inches. The output for 460 engines built before 1972 is 365 horsepower at 4,600 rpm and 485 pound-feet of torque at 2,800 rpm.

What’s the difference between a 429 and a 460 V8?

If you count seven bolts, then you have a 429 or 460 V8. All other Ford V8 engines have a different valve-cover bolt count. To differentiate a 429 from a 460, check the orientation of the thermostat housing on the front of the engine block. If it is pointing upward, it is a 460.

When did Ford stop making the 460 V8?

When Ford’s full-sized cars were downsized in 1979, there was no longer a need for the 460 V8, but it continued as an option in the F-Series trucks and E-Series vans into the 1990s.

How big is a 460 cubic inch engine?

1 General Information. The Ford 460-cubic-inch, V8 engine has a cylinder bore of 4.36 inches and a crankshaft stroke of 3.85 inches. 2 Dimensions. A 460-cubic-inch engine block is 34 inches long, 32 inches wide and 30 inches high. 3 Torque Specifications. 4 Identification. …

Is the Ford 460 a good engine for a RV?

As you can surmise from all the answers on this thread, the Ford 460 of that vintage is a great engine except that in RV’s theey tend to suffer from the dreaded dual fuel pump problem. If one fails ( ususally in the fuel tank), the other will also fail.

What’s the life expectancy of a Ford 460-rv?

Most Ford RV have problems with fuel pumps that is in the fuel tank. I have a 1996 at about 53,000 the pump went out and it cost $1100.00 at a Ford dealer to have it replaced. You paid way way too much!

Is the Ford 460 A J series engine?

Nor is that necessarily how Ford addressed certain matters when a production 460 was to be released as a J-series (Industrial/Marine) engine.

What’s the problem with the Ford 460 engine?

The 460 is choked to death by the stock systems. Posted By: Pittsburghracer on 06/06/12 10:20am The biggest problem with that engine is simple,exhaust and intake restriction. When I say exhaust I mean the whole thing,replace everything including the exhaust manifolds.

Where is the engine identification on a Ford 460?

460 I.D. Ford placed stickers on the valve covers identifying the engine as a 460. If the sticker is gone, or the covers have been replaced, look for a metal tag with engine identification attached to either the intake manifold in front of the carburetor, or to the ignition coil on the front of the engine.

How much does a Ford 460 crate engine cost?

Ford 460ci 406 HP: from $4895 for a crate engine; $5895 for a turnkey engine, depending upon parts used. Parts must be able to match HP application. (This engine comes with the Pertronix distributor and coil. The MSD 2 or MSD 3-pack distributor and coil is extra.)

When did the Ford 460 429 come out?

For 460s from 1968 through 1978, the number begins with a two; for 1979 and later models, with a three. Ford made the 429 only between 1968 to 1978–anything later will be a 460. The 460 and 429 have identical engine blocks.

What kind of car was the 1991 Fleetwood Tioga?

1991 Fleetwood Tioga 26′ Class C Motorhome, model S26. Ford V8 engine on a Ford Econoline 350 chassis, with very low miles (72,950).

What kind of engine does a Fleetwood Class C RV have?

Ford V8 engine on a Ford Econoline 350 chassis, with very low miles (72,950). Sleeps up to 6 and is fully self contained (full bathroom, full kitchen), including generator.Runs great, ready to go.

How many horsepower does a Ford 460 motorhome have?

I suggest decking the heads about .030″ and budget port work. Custom lunati voodoo cam on a 112 for the jet boat application. The C impellor will allow some 5800 rpm for about 450 HP so you will need to have the engines power band match.

What’s the bad side of a Ford 460?

On the bad side, however, the 460 head exhaust ports are extremely narrow and do not let the engine “exhale” to its full potential. The flow on the exhaust ports is so bad that adding a larger cam will completely choke out the engine and provide very poor performance at any RPM range.

What’s the compression ratio on a Ford 460?

The compression ratio was lowered to 8.5:1, and the carburetor is a Motorcraft four-barrel unit. After the mid-1980s, carburetors were replaced with electronic fuel injection with an output of 245 horsepower and 400 pound-feet of torque. A 460-cubic-inch engine block is 34 inches long, 32 inches wide and 30 inches high.

What should the C / are be on a Ford 460?

A pair of small chamber heads will raise the c/r from the typical 7.7 to 1 to about 9 to 1 ish. This assumes the typical rebuilder dished pistons that are .030″ below deck. I suggest decking the heads about .030″ and budget port work.

Are there any problems with the 1995 Ford motorhome?

If so, the module could be acting up due to heat failure and that’s a common problem with those modules. Those modules were also phased out after 1995 as far as I know. Symptoms can vary but coughing, chugging, or even flat dying on deceleration is one of them.

What’s the difference between a Ford 460 and 429?

Is there a problem with Ford 460 fuel pressure regulator?

For problems related to fuel delivery / pressure on FI Ford 460 7.5. Tried this on 2 90 F350’s and both times replacing the regulator fixed the problem. But both trucks had totally opposite symptoms Loading…

When Ford’s full-sized cars were downsized in 1979, there was no longer a need for the 460 V8, but it continued as an option in the F-Series trucks and E-Series vans into the 1990s.