The average total cost of trim installation projects ranges from $350 to $570 nationwide, and trim installation costs per linear foot can range from $4.50 to $6 for installation and painting of simple baseboards, chair rails and crown molding.

How much does it cost in labor to install baseboards?

The labor cost to install baseboards is $4.90 to $7.75 per linear foot. Baseboard materials are pretty inexpensive (only about $0.80 to $1.20 per linear foot). Labor makes up most of your price.

How do you calculate baseboard trim?

Add measurements together for each area — such as for the living room, dining room and so on — and divide the number by 12 to determine the linear square feet of each room, as base trim is typically sold in linear square feet.

How much should I charge to install quarter round?

The cost to have quarter round trim professionally installed is about $4.90 per linear foot, or around $390 for a 20 x 20 room. The most commonly used trim costs $0.70- $2.65 per linear foot, but DIY price for the project might be higher than that if you need to purchase tools and fasteners.

What is the labor cost to install crown molding?

Labor Cost to Install Crown Molding Most installations run in the $3 to $8 per linear foot range for labor alone, but some professionals report charging as much as $15 per linear foot for plaster and custom installs.

How much does trim cost?

Trim has a free and premium version, which costs $99 a year. With the free version, you can see all your finances in one place on the app’s dashboard. You also get subscription monitoring, savings suggestions, bill reminders and a debt calculator.

How do you calculate trim work?

Multiply the length times 2 and the width times 2, then add the values together, eg. (length × 2) + (width × 2) = perimeter. Subtract the length of any doors or windows that break up the room. For example, if you have a 36″ entry door to the room, subtract 3′ from the perimeter measurement.

How many linear feet are in a 12x12 room?

Multiply the length times the width of the room to get the room square footage. 12 ft x 12 in/ft (width of the room) = 144 in. So the total linear footage of the 1 x 12 boards is found by multiplying 5 (boards) by 6 (feet) which equals 30 linear feet.

How much does it cost to replace exterior wood trim?

Exterior Trim Installation Costs Expect to pay anything from around $1 to $5 per linear foot and between $70 to $100 per hour, depending on the complexity of the job. For a 1,500-square-foot home with 500 linear feet of trim, you can expect to pay up to around $2,500 for installation.

Which is more linear feet or square feet?

A linear, or linear feet, refers to length. Square feet refers to the measurement of area, so its understandable as to how this could get confusing. Most prices on flooring products are quoted in square feet. Trim and dimensioned lumber are the items sold by linear measurements.

Article first time published on

How much does it cost to install trim per linear foot?

The average total cost of trim installation projects ranges from $350 to $570 nationwide, and trim installation costs per linear foot can range from $4.50 to $6 for installation and painting of simple baseboards, chair rails and crown molding.

Do you paint Crown Moulding before installing?

While you have options about how to approach painting your walls, you should always paint or otherwise finish the molding itself prior to installation. Prime the molding before painting, and for both paint and other finishes, apply the finish to all sides, even the back. This prevents warping.

Is crown molding hard to install?

Crown molding is not hard to install. In fact, the most difficult part is ensuring the molding is cut correctly to fit the inside and outside corners of the room in which you will install it.

How do I bid for trim installation?

Take your costs per foot and add what you want to make on top of that, then add contingency for all those little things that will happen and you have your bid price per foot of moulding. Apply this method to each and every little piece of trim in the house and you have your bid.

How much should I charge for finish carpentry?

TypeAverage Cost Per HourFinish carpenter$35Trim carpenter$35Framing carpenter$20General carpenter$25

How much does it cost to repair molding?

AREA SIZE * per square feetAVERAGE COST100 sq. ft.$1,333 to $2,833150 sq. ft.$2,000 to $4,250200 sq. ft.$2,666 to $5,666

How much is 40 linear feet?

Add the length measurement of all of the room’s walls. Continuing the same example, 8 + 8 + 12 + 12 = 40 linear feet. This figure represents the linear footage of the room.

How do you calculate price per linear foot?

How to Calculate Linear Footage Price. Calculating the cost of lumber priced by the linear foot requires finding the total feet needed and then multiplying by the price per foot. Thus, the total cost is equal to the total length in feet by the price per foot.

How much is 32 linear feet?

2×4 boards: 8 feet times 4 boards = 32 linear feet.

How high off the floor do you install baseboard?

If you plan to install baseboard moulding before adding carpet, it needs to be installed 1 inch above floor level to allow room for both pad and carpet. If adding baseboards after carpet is laid, it should be installed at the same height as without carpet.

Is installing baseboards easy?

Adding or replacing baseboards is a simple enough DIY task, so long as you have a miter saw at your disposal. While the installation process for baseboards isn’t difficult, the most challenging part is measuring and cutting the trim at the correct angles.

How many feet is equal to 1 square feet?

1 ft2 =1 feet1 feet =8 ft2 =2.8284 feet8 feet =9 ft2 =3 feet9 feet =10 ft2 =3.1623 feet10 feet =11 ft2 =3.3166 feet11 feet =

How do I convert square feet to linear feet for baseboards?

For instance, to calculate the linear foot measurement to replace baseboards in your room, measure the length of one wall and the width of the other. Then multiply each measurement by two and add all four numbers together.

How many linear feet do I need?

To measure linear feet, measure the length in inches, then divide by 12 to determine linear feet. No complicated calculations required, as when you’re measuring square footage!

Should crown molding be caulked?

After crown molding is installed, it is caulked at the top and bottom, to hide the gap. Occasionally, this may need to be recaulked. However, if the crown molding is a different color and the caulk was painted, you’ll need to make sure that you use a paintable silicone caulk. …

Do you glue or nail crown molding?

Crown is typically nailed up with a 2” finishing nail and a compressor and finishing gun. Outside corners are usually done with a brad nailer and 1” brad nails with glue. Studs are generally 3-1/2”, drywall a ½” and the crown moulding a minimum of ½”; therefore 2” finishing nails are necessary.

Is crown molding worth the cost?

Crown Molding can lead to increased home value and a positive ROI depending on how much you have invested in the project. Many homeowners want easy projects that will increase their resale price, and you can do that by adding crown molding. … You can put crown molding in any room.

Can I install crown molding myself?

Compared to wood, foam crown molding is not only affordable and easy to install, but it’s also pliable—making it easy to work with around the curvatures of your home.

How far down the wall does crown molding go?

For standard 8-foot-high ceilings, the crown/cornice height should be 2½ to 6 inches; for 9-foot ceilings, 3 to 7½ inches, and for 10-foot ceilings, 3½ to 8 inches.