What is the cable on a pop up camper?

In the Goshen lift system, the cable originates from the winch and connects to a system of pulleys, which are centrally located underneath the pop-up camper. There is also a tube running from a distribution case to each of the four corners of the RV.

How does a Jayco pop up camper cable system work?

The cable system operates on a single winch. The winch sits on the front and controls a separate cable for each corner of the trailer. Cranking the winch handle pulls the cable through the pulleys and lifts a rod on each corner. The rods lift and hold the roof in the raised position.

What kind of cable do I need for Pop Up camper?

1: Goshen Lift Replacement Cable for Pop Up Campers. 2: Coleman Lift Cable (Long – 1999 and Newer) 3: Jayco Lift Cables (Set Of 4) In most models of pop up campers, the roof has to be lifted, “popped up” or raised before the vehicle can be used. This is done using a lifting system composed of winches, cables, springs, and pulleys.

How does a Jayco camping trailer lift work?

This cable attaches to a plate which pulls a square plate that the four lift cables connect to wit eyebolts. Jayco camping trailers, which first came on the market in , use a winch and a system of cables, pulleys, drive slugs, flexible push rod springs, and telescoping posts to raise and lower the roof.

How do you cut cable on Jayco camper?

Select one of the secondary cables connected to an eye bolt on the distribution block. Cut the cable off the eye bolt with cable cutters. Follow the cable through the track until you reach the termination point at the drive slug. Memorize the route through the pulleys and cut the cable off the drive slug.

Can a Jayco pop up camper be repaired?

I am getting a Jayco Pop-up Camper. the Lifting crank mechanism needs repaired. The handle turns but it dont lift. Is there a manual. When the roof lift system fails, the problem is usually a broken cable or cable attachment. Most do-it-yourselfers can repair Jayco camper cables with minimal.

How do you change the roof cable on a Jayco camper?

Cranking the winch handle pulls the cable through the pulleys and lifts a rod on each corner. The rods lift and hold the roof in the raised position. Replacing the cables requires new materials and access to the pulleys and winch system. Manually raise the roof with two or more people.

1: Goshen Lift Replacement Cable for Pop Up Campers. 2: Coleman Lift Cable (Long – 1999 and Newer) 3: Jayco Lift Cables (Set Of 4) In most models of pop up campers, the roof has to be lifted, “popped up” or raised before the vehicle can be used. This is done using a lifting system composed of winches, cables, springs, and pulleys.

This cable attaches to a plate which pulls a square plate that the four lift cables connect to wit eyebolts. Jayco camping trailers, which first came on the market in , use a winch and a system of cables, pulleys, drive slugs, flexible push rod springs, and telescoping posts to raise and lower the roof.