But exactly what is a dual mount ceiling fan? Well to put it simply it’s a fan that has been designed to fit in to most rooms, without the ceiling height being an issue. Normally when you want a ceiling fan you fall in to one of two brackets. … A dual mount ceiling fan has been designed for both eventualities.

What is a dual mount ceiling fan mean?

But exactly what is a dual mount ceiling fan? Well to put it simply it’s a fan that has been designed to fit in to most rooms, without the ceiling height being an issue. Normally when you want a ceiling fan you fall in to one of two brackets. … A dual mount ceiling fan has been designed for both eventualities.

What is standard mounting for a ceiling fan?

You will want your new ceiling fan to hang between 8′ and 9′ above the floor, regardless of ceiling height. Most fan bodies (including mounting hardware) are 8 to 12 inches. So, whatever your ceiling height is in feet, buy a downrod that will put the top base of the fan at 10 feet.

Can any ceiling fan be flush mounted?

Flush mounts anchor the fan directly against the ceiling. Most standard fans can be installed as a flush mount however, many manufacturers sell “hugger” or “low profile” ceiling fans that are specifically designed for this purpose.

Is a 3 blade ceiling fan efficient?

Three-blade fans are generally considered ideal because they have enough blades to ensure sufficient airflow but not too many blades to increase the drag coefficient enormously. For this reason, the three-blade ceiling fan is more energy-efficient than the five-blade ceiling fan.

Are all ceiling fan mounts the same?

When it comes to finding a replacement ceiling fan bracket, they come in different shapes and sizes. … This is one that’s designed so you can put a downrod on it, so if you have a higher ceiling fan, you can drop that ceiling fan a little bit lower. When it comes to, they come in different sizes, different lengths.

Can a dual mount ceiling fan be flush mounted?

Special Mounting Systems To hang a fan on a sloped ceiling, use a single mount fan with an angled mount. Dual mounting systems are unnecessary on sloped ceilings, as you can’t install flush mounted fans on a sloped surface.

When should a ceiling fan be flush mounted?

As a simple rule: If your ceiling is 7.5 feet high or less, you need a flushmount ceiling fan. A standard mount ceiling fan will not meet the 7 foot minimum distance requirement (fan blades to floor).

Is low mount the same as flush mount?

This is why they are often interchangeably referred to as flush-mount ceiling fans and are a great choice for low ceilings or small rooms. Hugger ceiling fans are also often lumped together with low profile fans, but these are slightly different as discussed below.

Is a 54 inch ceiling fan too big for a bedroom?

The ALA recommends a 29- to 36-inch fan for a room up to 75 square feet, such as a bathroom; a 36- to 42-inch fan for a medium-size room up to 144 square feet; and a 50- to 54-inch fan for a room around 225 square feet; 54- and 60-inch or larger fans are available for larger spaces.

Article first time published on

Can a ceiling fan be too close to the ceiling?

Except with very low ceilings, avoid locating the fan too close to the ceiling. It will not distribute air as well. However, for safety, the blades should never be less than 7′ above the floor.

What size ceiling fan do you need for a 20x20 room?

Room SizeCeiling Fan Sizeceiling fan size for 13×13 room44″ to 54″ceiling fan size for 15×15 room44″ to 54″ceiling fan size for 16×16 room44″ to 54″ceiling fan size for 20×20 room50″ to 72″

Is a 3 blade or 5 blade fan better?

When it comes to design and aesthetic look, the 3 bladed ceiling fan is more pleasing than the 5 bladed. … Generally, the more blades the ceiling fan has, the quieter it is and circulates less air. Ceiling fan with more blades can increase the drag on the motor and affects its movement.

Is a 3 blade or 4 blade fan better?

4-blade ceiling fans are less noisy and are useful in rooms with an air conditioner, to move the cool air around. They are often more stylish looking. However, 4 blade fans may move air slower than a 3 blade fan and can be more expensive than 3 blade ceiling fans.

Do 3 blade fans work as well as 5 blades?

There is a common misconception that five ceiling fan blades work better than four or even three blades. … According to Energy Star more blades do not move more air 1 – even one, two, or three bladed fans can be extremely efficient — what matters is the strength of the motor powering the fan.

What does dual mount?

This means the top rim of the sink is sitting above the countertop. Dual mount sinks can be used as drop in sinks with any countertop material. … Compared to a standard drop in sink, dual mount sinks often have a lower profile edge which allows it to be flush or nearly flush with the countertop.

Can ceiling fan Downrods be cut?

Downrods, if not threaded at both ends can be custom cut but cannot be purchased at a custom length.

Can I convert downrod ceiling fan to flush mount?

Many flush-mounted ceiling fans are designed to move the same amount of air that ceiling fans with a down rod can move. … In the event that you do successfully flush-mount a ceiling fan by removing the down rod, you’ll find that there will be a lot less air moving in your room.

What does it mean when you have a blue and black wire coming from the household circuit?

The black wire is the hot wire that leads to the switch. The white wire is neutral and completes the electrical circuit. … If there is a blue and black wire coming from the household circuit, there should be two switches on the wall. If there is a red wire coming from the ceiling, it is hooked up to the wall switch.

Do ceiling fans come with mounting brackets?

Most ceiling fans come with a mounting bracket; if yours does not, you can buy a mounting kit separately. Attach this bracket to the ceiling box following the manufacturer’s instructions. This bracket typically has a circular receptacle for a ball mount installed on the fan motor or extension rod.

How do you tell if an existing junction box will support a ceiling fan?

The manufacturer must have marked the outlet box system to indicate that it is acceptable for ceiling fan installations. If the original box is not listed for this purpose, it must be retrofitted and attached securely to the building structure.

Are Downrods necessary?

A downrod has two primary and important functions, one is to stabilise the fan and prevent it from wobbling when in motion, and the second is to aid the proper flow of air while maintaining a safe distance between the blades of the fan and the ceiling, as well as the blades of the fan and the floor.

What does downrod mount mean?

Downrod Mount: This option is made for rooms with high ceilings, typically 8 feet or higher. Many ceiling fans include a downrod (a slender pole that can lower your ceiling fan to the optimal height). Check the ceiling fan packaging to see if a downrod is included and note the size.

Can you put a ceiling fan on an 8 foot ceiling?

In order for a fan to be considered to be OK to use on an 8 foot ceiling, the bottom of the blades of the fan must be 7 feet off the floor when the fan is installed. The fan bodies themselves may extend slightly below the blades but will not affect the fan’s ability to be mounted on an 8 foot ceiling.

What does flush mount mean?

A flush mount light is typically a dome-shaped ceiling light fixture that’s mounted flush to the ceiling. A semi-flush mount light is more decorative, and the base of the light extends just below the ceiling.

Is Downrods universal?

Ceiling fan downrods are not universal. Each manufacturer creates downrods to fit with their particular design of ceiling fans. They differ in their UL rating, diameter, color, and type of installation.

What happens if a ceiling fan is too big for a room?

If your ceiling fan is too big for the room, it can be dangerous. It may be mounted too low, bringing you and your family into contact with the blades, or your ceiling may fail to support it. You will also get an overpowering amount of air regulation and potentially a lot more noise.

How far should fan blades be from the wall?

Keep the distance between the fan blades and the ceiling at the optimum distance of 8-10 inches to ensure efficient circulation of air. Keep the distance between blades and any light fixture at a minimum of 39 inches. Keep the distance between the fan blades and any wall at a minimum of 18 inches.

How many blades is best for ceiling fan?

Choosing a fan with four or five blades used to be the best way to ensure quiet operation, as more blades tend to create natural balance within the fan. This balance keeps the ceiling fan centered, causing it to produce less ambient noise than one with fewer blades.

What size room do I need for a 52 inch ceiling fan?

Blade SpanGood forRoom Size29″ to 36″Bathrooms, Breakfast Nooks, Utility RoomsUp to 75 sq. ft42″ to 48″Bedrooms, Kitchens, Dining RoomsUp to 175 sq. ft52″ to 56″Large Bedrooms, Family Rooms, Media RoomsUp to 350 sq. ft60″ or largerGreat Rooms, Other Large SpacesMore than 350 sq. ft

What size room do I need for a 60 inch ceiling fan?

Ceiling Fan Sizes Per RoomMedium bathroom, bedroom, home office75 to 175 square feet42 to 48 inchesLarge bathroom, large bedroom175 to 350 square feet52 to 56 inchesLarge living room, room with high ceilingOver 350 square feet60 inches or greater