They actually stand for the phrase “Resistance Temperature Detector”. This detector is a key piece in the development of RTD plywood. It provides a reading of the temperatures during the bonding process of each layer on this sheet of plywood.

What is RTD plywood?

Specifically, it refers to plywood that has been manufactured using a Resistance Temperature Detector. This is a device used during the manufacturing process that provides a highly accurate reading of the temperatures achieved during the bonding process.

What does CD stand for in plywood?

CDX sheathing is used primarily by contractors to build exterior walls and roofs. The letters “CD” represent the veneer grades used on the front and back, and “X” means the glue (not the wood) is rated for outdoor exposure—but only for a short time.

What's the difference between CDX and CDX plywood?

There are different grades/classes of plywood which are represented by letters A, B, C and D. … If so, it therefore, means CDX has the most number of knots and defects, making it a lower grade plywood. C in CDX means one side of the plywood is of grade C, and the other is of grade D.

What kind of wood is CDX plywood?

CDX plywood is manufactured, like other types of softwood plywood, of opposing layers of wood veneers, laid at right angles to each other and glued together with resinous glue. There are always an odd number of layers, balancing the sheet, to prevent warping of the panels.

What is BC grade plywood?

BC Plywood is a top quality product with a smooth surface. The BC simply means there’s one B-grade side sanded and smooth, backed by a C-grade side. BC Plywood is ideal for jobs that require a finished sanded product.

Is RTD plywood good for exterior?

Exterior panels sometimes referred to as RTD sheathing, are designed to hold up to constant moisture. They are completely waterproof and are great for installing in places where you expect consistent exposure to moisture. This RTD sheathing is great for roofs and other outdoor applications.

What is fire rated plywood?

Fire treated plywood is specially treated with chemicals that provide a physical barrier to flame spread. … Certain plywoods are also graded “Exterior” which gives it both a fire retardant rating and a treatment to prevent the fire retardant chemicals from leaching out in wet conditions.

What is B4 grade plywood?

Plywood grades of A1, A2, B1, B2 are a good two sided product and would be used where both sides are going to be seen. … A4, B4, C4 are a one-side-good product. The back may have open knots, filled knots, bad veneer joints or seams. This material will would work well for drawer bottoms, and similar.

What is the difference between AC and BC plywood?

Plywood graded B-C is more affordable than A-C or A-B. The B side becomes the prominent face, with a few visible defects and color variations or streaks. The C side or back has obvious defects that can be placed inside or on the backs of doors.

Article first time published on

What is the difference between CD and DD plywood?

Construction ply in CD or CPD or DD comes as either a non-structural or an ASNZ2269 certified structural panel. CD has one sanded face, while D face allows for some unfilled knots & splits. With a marine glue this is used in all aspects on interior construction.

What does ACX plywood mean?

ACX plywood is a high-grade plywood made not from a species of tree but from veneers, which are thin sheets of peeled wood grain. … The ‘A’ in ACX plywood refers to the side of the wood that is considered the ‘front’ — and that can sometimes be sanded — while the ‘C’ designates the ‘back’ face.

What is F8 CD plywood?

F8 Structural Plywood is also available in two grades, CD and DD. CD is a superior grade with no open face knotholes, no more than 8 wood patches and limited synthetic repairs on the face, 150 grit sanding on the face and 100 grit on the back.

Is OSB stronger than CDX?

It can withstand moisture for a short time. Therefore it is suitable for floor, wall, roof sheathing, and for other moist places. CDX plywood is not good moisture resistant. But it is stronger and more durable than OSB.

What is the difference between MDO and HDO plywood?

Both MDO and HDO are hardwood plywoods with a resin soaked fiber overlays between the veneer layers and on both surfaces. … The only differences between the two products are that the density of the exterior fiber layer on the HDO is considerably higher than for MDO and it is manufactured with higher resin content.

Does Lowes sell CDX plywood?

Severe Weather 1/2-4-8 TREATED CDX PLYWOOD at Lowes.com.

Which plywood is best for roofing?

Exterior Plywood is the preferred material for roofing. It also performs well when exposed to moisture over long periods of time. The price is low compared to other roofing materials and the installations are also easy.

What type of plywood is best for subfloor?

Cheap and strong makes CDX plywood great for use as a structural panel such as a subfloor. Remember the letter grade of plywood only has to do with cosmetics and not strength. CDX plywood is just as strong as higher grades. CDX is a type of plywood that grades C, D or X.

Is it better to use OSB or plywood for subfloor?

The National Tile Contractors Association and the Resilient Floor Covering Institute both recommend plywood for subflooring and underlayment, because it doesn’t have the risk of swollen edges that OSB does. Plywood also has a slight advantage in stiffness, which means that subflooring panels need not be quite as thick.

What is AA grade plywood?

Hardwood Plywood with “AA” grade face and back and marine grade bond. Excellent veneer quality makes this product ideal for staining and painting. Marine bond will not deteriorate due to moisture exposure. Excellent strength and stiffness.

What is AB marine plywood?

A high quality marine-plywood panel built using premium water resistant glues, designed for applications where high moisture conditions may be encountered. A popular product with marine carpenters and boatbuilders, AB Marine plywood is always in stock at Wood-Chip Marine Lumber.

Which is the strongest plywood?

The answer is marine plywood. It is the strongest and toughest of all plywood on the market. High-quality glues hold the plies in marine plywood together. That makes them structurally sound and resistant to moisture.

What is sanded plywood called?

A-grade plywood features a smooth, sanded surface without knots. Any wood defects have been repaired with synthetic filler, so the veneer can be painted. A-grade plywood is ideal for furniture or cabinet doors.

What does B2 mean for plywood?

“B2 is the appearence grade of the two face veneers. The best face is graded “B” on a scale of A-D and the back side side is graded “2” on a scale of 1-4. ” B2″ would be classified as a paint grade plywood but you can find many good sheets that will be suitable for clear finishes.

What is G2S wood?

Good 1 side, as in plywood. G2S. Good 2 sides, as in plywood, MDO, etc. GRN. Green, undried lumber – logs cut into boards or timbers.

Can I paint fire rated plywood?

When you build with our fire resistant plywood, you will be able to paint and stain it just as you could do with untreated plywood. … Fire resistant plywood is plywood that has been treated with preservatives that allow the wood to burn more slowly than untreated wood if it were to ever catch on fire.

How do you fireproof plywood?

Flame guard can be applied in two different ways to create your fire retardant plywood. You can apply the coating directly to the wood as a sealer and then paint over it ,or apply as a top coat over pre-stained or pre-painted lumber.

Can you paint fire treated plywood?

Painting fire treated plywood from Chicago Flameproof is completely fine! … As its name might suggest, our fire treated plywood is fire resistant! This plywood has been treated with fire retardant preservatives that allow the plywood to burn more slowly than untreated plywood would burn if ever caught on fire.

Is AC plywood exterior grade?

Use of “AC” Grade Plywood “AC” grade plywood is one of the most common types. Although the “AC” only gives the visual quality of the plywood surface, the plywood can be used for interior and exterior applications, determined by a separate exposure durability classification and span rating.

Is AC plywood sanded?

AC plywood is made from thin sheets of wood pressed tightly together to create a durable and strong piece of plywood. One side of it is sanded and finished which makes it graded “A”. The other side of the board is not sanded or finished, so it is graded “C”.

What are the three grades of plywood?

• “A” Grade. Sanded smooth, paintable. …
• “B” Grade. Solid surface with some repairs, usually football-shaped patches and/or wood filler. …
• “C” Grade. Tight knots to 1-1/2 in. …
• “D” Grade. Knots and knotholes up to 2-1/2 in.