What does out of stroke auto level?
What does out of stroke auto level?
If you get the Out of Stroke error message on the Lippert Ground Control system, such as # LC358590, then that indicates that the jack has extended as far as it will go and cannot go any further. To clear the error you can extend all of the jacks in the system at least 6 inches.
How do you level up a 5th Wheel?
Auto Level Sequence 1. Front landing gear (Fig. 6A) retract, lowering the front of the trailer below level, stopping, then lifting the front end to level the trailer front to back. 2. The left side leveling jack(s) (Fig. 6B) extend and raise the roadside of the trailer.
How big are the level UP JACKS on a 5th Wheel?
Level-Up® is an Automatic Leveling system. This system is equipped with 14K Aluminum Front Jacks with 21” of travel and 8K Aluminum Leveling Jacks with 15” of travel. The jacks in the Level-Up® system work in pairs.
How to level up LCD 5th Wheel Forest River?
Left-to-right in degrees will display. D. Battery Voltage – current battery voltage will display. Callout Description A *Up Arrow Button – Scrolls up through the menu on LCD. B *Down Arrow Button – Scrolls down through the menu on LCD. C ENTER Button – Activates modes and procedures indicated on LCD.
Can you use the level up system on a trailer?
The use of the Level-Up® leveling system to support the trailer for any reason other than which it is intended is prohibited by Lippert’s limited warranty.
Auto Level Sequence 1. Front landing gear (Fig. 6A) retract, lowering the front of the trailer below level, stopping, then lifting the front end to level the trailer front to back. 2. The left side leveling jack(s) (Fig. 6B) extend and raise the roadside of the trailer.
What’s the first step in unhitching a 5th Wheel?
The first step in unhitching is to find a level site. Avoid uneven ground while hooking up as well as when unhooking it. Then situate the fifth wheel where you want to park it after unhitching. Once you park, the first thing to do is to chock your wheels and make sure they are secured.
How do you unhitch a 5th wheel trailer?
The next step in the unhitching 5th wheel is to disconnect the brake cable, emergency brakes, and chains. Before you disconnect, make sure you engage the vehicle parking brake. In this step, make sure you set up the landing gear before releasing the trailer.
Level-Up® is an Automatic Leveling system. This system is equipped with 14K Aluminum Front Jacks with 21” of travel and 8K Aluminum Leveling Jacks with 15” of travel. The jacks in the Level-Up® system work in pairs.
