Is the cf80 frig lamp always on or off?
Is the cf80 frig lamp always on or off?
This does not affect the operation of the CF80 frig Lamp, which is always available, even if the CF80 is OFF via the Display Panel. The total DC current drawn from battery when the frig is ON varies between 3.5 and 7.5 amps depending on multiple factors.
Is there an on switch for the Waeco cf80?
When mains is first supplied to the CF80, via the AC plug, and DC is not available, then all LEDs flash. There is no ON switch as such for the Waeco CF80, the Danfoss controller, or for the compressor.
How is the Danfoss controller connected to the mains?
When the AC power cord is connected and mains is available, the Danfoss controller is always “live”, irrespective of whether “ON” is selected on the top control panel. Similarly with a DC connection, the Danfoss controller is always “live” to DC. If both mains and DC are connected, the Danfoss controller is “live” to both AC and DC.
What is the DC current on a cf80 freezer?
The total CF80 DC current drawn when the frig is OFF (via the Display Panel), and when battery is available, is approx 0.08 amp.
Why does my CF 50 stop working on 12V?
My CF 50 suddenly stopped working on 12v but still works on 240v. Not much help driving in the bush. i have a 50L waeco and it’s set on 6 degree snd is still freezing all my stuff in there any reasons
What can I replace to fix this CF50?
Within 3 hrs the temperature changes from -5 to 10 degrees I have a CF50 non of the control lights are working except when you push set I could set it down to -18degees where it is now stuck. What can I replace to fix this? There is small rubber pieces under the control panel buttons that interface with the PCB buttons.
What does the error light on my Waeco cf-50 mean?
I have a Waeco CF-50. The error light flashing red on ac power. The explanation in the book says “switched on device is I have a Waeco CF-50. The error light flashing red on ac power. The explanation in the book says “switched on – Answered by a verified Appliance Technician We use cookies to give you the best possible experience on our website.
How to connect cigarette lighter to AC mains?
•Only connect the device as follows: – With the cable supplied (Fig. 1 2, page 4) to the cigarette lighter in the vehicle or to a 12/24 V plug socket in the vehicle – or with the enclosed connection cable (Fig. 1 3, page 4) to the 100-240 V AC mains (only CF-35, CF-40, CF-50, CF-60).
