No, since board and batten siding is made of wood and relatively complex to install, it’s typically more expensive than horizontal vinyl siding. Board and batten can range anywhere between $5 and $12 per square foot while horizontal vinyl siding usually costs between $2 and $6 per square foot.

Is board and batten cheaper than metal siding?

Metal Siding Cost Aluminum siding costs about $3 to $6 per square foot, including installation – slightly less than board-and-batten siding. Steel siding, on the other hand, is more expensive, ranging from $7 to $8 per square foot.

Does vertical siding cost more?

When considering the cost of installation, vertical siding is more expensive and time-consuming to install than horizontal siding because furring strips are placed underneath first to ensure that the siding is aligned properly and smoothly.

Is board and batten cheaper than drywall?

Trimming interior walls with board and batten is far less expensive because no base planks are used—the battens install directly to drywall, which substitutes for the wider vertical boards used in exterior siding.

Is horizontal or vertical siding better?

If you want your home to blend in with its neighbors, stick with horizontal siding. If, on the other hand, you want your home to stand out, vertical siding may be the best choice. Vertical siding is more difficult and expensive to install; however, it is easier to clean. Horizontal siding is more prone to water damage.

What is the most expensive siding?

When it comes to cost, stucco siding is among the most expensive siding options. Stucco costs between $6 and $9 per square foot.

What is the cheapest siding material?

Vinyl siding is also one of the cheapest siding options on the market, both in material and installation costs. Vinyl siding can be installed quickly and can even be installed directly over existing material. The average price of vinyl siding is $2 to $7 per square foot, installed.

How much does it cost to install board and batten siding?

Installing new board and batten siding costs between $4,000 and $14,000, but most homeowners pay about $9,000 on average. Material boards cost between $0.75 and $10 per square foot. Including labor, the total cost to install board and batten siding averages $2.25 to $12.50 per square foot.

What is the best type of siding?

Siding TypeOptionsDurabilityVinylExcellent20-30 yearsAluminum & SteelGood30-50 yearsFiber Cement & CompositeGood35-50 yearsWoodExcellent50+

What kind of wood is used for board and batten siding?

Most common types of lumber used in board and batten siding are: Cedar. Pine. Redwood.

Article first time published on

Do you caulk board batten siding?

Board and batten is a traditional siding that works well if you’re on a budget and live in rustic surroundings. … Installing it can be more labor-intensive than installing comparable wooden sidings, and sealing the battens with caulk to weatherproof the house is an important part of the process.

What is the most durable siding?

In terms of price, maintenance, and strength, vinyl siding is the most durable siding material to choose from. It’s also available in many different colors and styles such as dutch lap, shake, scalloped and more.

How long is board and batten vinyl siding?

Board & Batten Features: Two lengths: 12’6″ (8″ profile) or 10′ (7″ or 8″ profile)

What is batten board siding?

So, what is “board and batten?” It’s a type of siding where thin strips of wood molding—or “battens”—are placed over the seams of panel boards. The result is an aesthetic that is both rustic and chic, with the strong vertical lines providing shadows and textures to the home exterior.

How much does it cost to side a 1500 sq ft house?

An average 1,500 square foot house would cost around $7,700 for standard aluminum siding and upwards of $11,000 for custom grades after labor and material costs.

Can lap siding be installed vertically?

Lap siding can be installed horizontally or vertically.

Does vertical siding make your house look taller?

Vertical siding is found mainly on nonresidential buildings, like libraries, barns, schools, etc., so some homeowners feel it’s not as “homey” as horizontal siding. Others, however, prefer the look because it makes their house look taller and draws the eye toward the roof.

What's the cheapest wood siding?

Plywood is the most affordable wood siding. $3.50 to $7.20 per square foot installed. The most common type of wood siding is Cedar lap siding and ranges from $5 to $10 per square foot installed. Cedar shingles are the most expensive type of wood siding.

What is the cheapest way to side your house?

Vinyl siding is cheap, ranking among one of the least expensive ways to side your home. Many homeowners are happy with the look of vinyl siding. Vinyl’s look is improving, too, with technological advancements in texture and colorfastness. You can also paint it if you want.

What is the most economical way to side a house?

Wood siding is considered the most economical material to use for your exterior home decorations since wood materials are considered cheap. However, keep in mind that other types of hardwood materials such as oak can be very pricey.

What is the easiest siding to install?

How to Install Vinyl Siding. Compared to other sidings, vinyl is one of the easiest to install. It cuts easily, can be put up quickly, and requires no painting.

Which is more expensive Hardie board or brick?

Brick runs approximately $4/SF for the installation labor. It takes more labor and more time to install brick veneer siding than it does hardi plank, thus making the brick significantly more expensive when comparing on a square footage basis.

Is James Hardie siding more expensive?

While James Hardie siding is relatively affordable in and of the product itself, what makes it a more expensive option than a siding like vinyl is the cost of installation. … However, even with installation costs, James Hardie siding is still more affordable than other siding options like cedar planks, brick, and stone.

How much should I pay for siding?

On average, installing siding on a house costs $12 per square foot. For those choosing the most budget-friendly options, that cost may be reduced to $2 per square foot. More expensive materials can be priced at up to $50 per square foot. Common siding types include brick, wood, fiber cement, metal, vinyl and stone.

What type of siding is most energy efficient?

• Vinyl siding is thermally resistant, making it highly energy-efficient, especially when paired with foamed siding.
• It’s cost-effective, as the material is less expensive and can be easily retrofitted.
• Vinyl is available in many styles and colors.

Which is better Hardie board or vinyl siding?

By contrast, Hardie® fiber cement siding is more durable and up to 5x thicker than vinyl siding. It easily stands up to the elements, resisting damage from wind, rain, freezing temperatures and hail, and gives homes years of protection with low maintenance.

How often do you have to paint board and batten?

Wood siding needs to be sealed with either paint, stain, or a sealer. Here’s the difference: Paint. Needs to be done about every five years, or as soon as you see it deteriorate.

Do they make board and batten vinyl siding?

Make a bold statement with Board & Batten Vinyl Siding, available in striking colors that look like freshly painted wood—perfect for cottage or mountain retreat-style homes.

How far apart should battens be for siding?

How To Install Board and Batten Siding. To install board and batten siding, first install wide vertical boards, spaced approximately one board width (7/8″) apart. Secure these boards using fasteners fasteners placed at the center of the siding boards.

How far apart should board and batten siding be?

Typically, batten are spaced anywhere from 12” to 24” apart. I think it looks best to space them as close to 18” as possible, but that’s just a personal preference. Our wall is 164” wide, so we used 8 batten (for a total of 7 spaces) with a distance of 19.42 inches between each batten.

How far apart should battens be?

Traditional batten spacing was dictated by the width of the boards being used. If the boards were 12-inches wide, then that was the batten spacing. If the boards were 8-inches wide, then the battens were installed 8 inches apart.