Beadboard panels in a bathroom should be specially formulated for moisture resistance; for porches and other outdoor areas, you’ll need exterior-grade fiberboard or PVC.

Is beadboard water proof?

Unique and cost-effective, PVC (vinyl) beadboard planks are waterproof and easy to clean.

Can you use beadboard in a shower?

Plastic bead board is an effective mold-resistant product that is used as a shower surround. It is a durable exterior product that is made of PVC and has the appearance of wainscoting. You can use plastic bead board as a shower surround.

Is beadboard OK to use in bathroom?

Beadboard does not have to be installed simply as a wainscoting and nothing else. It can also be used to cover all the walls in the bathroom from floor to ceiling. This look works particularly well in bathrooms with low ceilings, because the vertical lines help to visually elongate the space.

Can beadboard be used outside?

EXTERIOR BEADBOARD Besides its appearance, Wood Beadboard Paneling’s beauty comes from the numerous ways it can be used outside of a home. Depending on how it’s styled, Beadboard Paneling can lend cottage, farmhouse, rustic or coastal charm to a house.

Can beadboard get wet?

Our Moisture Resistant (MR) MDF Beadboard is ideal for rooms with high humidity and or the potential to get wet such as a full bath and or damp basement. You can intermix standard MDF Beadboard Panels with MR Beadboard Panels because they have the same profile.

What is beadboard bathroom?

But while wainscoting often comes in the form of large inset panels, beadboard features small wood planks vertically lined. Beadboard is traditionally used in bathrooms, but many people are also using beadboard on their ceilings!

Will beadboard warp in a bathroom?

The steam from the shower will cause it to warp and it will look bad in a few years. Both my wife and I think he is crazy… I have seen older homes in my neighborhood with wainscoting in bathrooms and it has been there for a long time and still looks good.

How do you put beadboard in a bathroom?

1. Measure wall width. …
2. Mark Studs on the Wall. …
3. Attach first beadboard panel to wall. …
4. Cut beadboard panel to size. …
5. Make custom cuts for bathroom pipes and outlets. …
6. Install chair rail moulding to beadboard bathroom. …
7. Install baseboard moulding to beadboard bathroom. …
8. Fill nail holes, caulk, and paint.

What is the difference between beadboard and shiplap?

Shiplap and Beadboard are two very different materials – shiplap refers to wooden boards of the same width with grooves that help each board fit together tightly, while beadboard is a collection of narrow wooden planks of equal size, installed vertically, with grooves between each board (also known as the bead).

Article first time published on

Does beadboard go over drywall?

Beadboard may be installed over drywall or old plaster providing these materials are solidly attached to the wall framing. In our project, we installed the beadboard as a countertop backsplash and needed to remove the old laminate from the wall.

What is the difference between wainscoting and beadboard?

Wainscot is pieces of moulding that are put together, generally in boxes, below the chair rail. Beadboard is a sheet of wood/plywood that has grooves on it and is used over the entire wall or parts of it,. ie under the chair rail, as backsplash.

Is beadboard good for outdoor use?

First of all, a beadboard porch ceiling is a flattering choice for any outdoor ambiance. Beadboard achieves the stunning look of pristine wood paneling without resorting to the traditional wood sourcing.

How much does a sheet of beadboard cost?

Beadboard Prices Beadboard costs $0.50 to $1 per square foot and a contractor charges $4 to $6 per square foot to install it.

Can you use beadboard as siding?

Beadboard will give your home the look you are going for, all while sparing yourself some extra pocket change. Beadboard siding is overall a great siding option if you are looking for an affordable, durable option that will fit great with any style you are planning on going with.

How high should a beadboard be in a bathroom?

While there is no single standard height for installing beadboard in a bathroom, the typical height ranges from 38-to-42 inches off the ground, or taller than the vanity or sink.

Is beadboard fire resistant?

Our Fire Rated (FR) Beadboard is made specifically for Commercial Projects that require a Class A / Class 1 rated fire-retardant beadboard. These Fire Rated beadboard panels are ideal for interior use in public areas such as schools, hotels hospitals and restaurants.

What can I put on my bathroom walls?

• Summary.
• Vinyl Wallpaper.
• Paint.
• Tile.
• Beadboard.
• Tileboard.

Is wainscoting water resistant?

POLYMAX WAINSCOT® Wall Panels POLYMAX WAINSCOT panels are 100% waterproof, UV-mold/mildew resistant, paintable and stand up to spills, splashes and impacts! They are quick and easy to install, a perfect weekend project for any handyman!

How thick is beadboard paneling?

Bead board is usually made from ¼” to 3/8” thick plywood or MDF. It is grooved with a bead or “V” groove at repeating distances such as 2” or 4” on center, etc. Wainscoting is a decorative panel, available in different materials, thicknesses and patterns.

Is beadboard expensive?

Beadboard is relatively affordable, compared to other professionally installed ceiling treatments, such as tray ceilings, which can easily cost in excess of $10,000. DIY beadboard kit systems can be installed by a homeowner with basic carpentry knowledge.

How do you put beadboard around a toilet?

Apply adhesive to the wall and press each beadboard piece into place on the wall. Work on small sections of the wall at a time. Use a standard bubble level to ensure that each piece is straight and square by laying the level along the side of each new piece and making sure that the bubble is between the lines.

Does beadboard go behind the baseboard?

Attach Beadboard Panels The beadboard panels rest on top of the baseboard, and the pieces fit together snugly using the tongue-and-groove edges. Make sure that the corner piece fits tightly against the corner of the walls. … Continue installing panels along the length of the baseboard.

Why is my beadboard cracking?

Separating beadboard can be a recurring problem in areas of high humidity or with large fluctuations in temperature. For example, beadboard installed in a bathroom will expand and contract with every use of the shower. This can eventually cause the panels to separate, even when caulked.

Do you caulk beadboard?

Caulk is applied to fill the gaps and seal the seams between the beadboard, the chair rail and the wall. Caulking prepares the surface for painting and leaves clean lines. … Use a mild soap and a wet rag to wipe the tops of the chair rail and along the seams of the beadboard.

How do you cover beadboard seams?

1. Fill the seam joint with wood putty. …
2. Sand the covered joint with 220 grit sandpaper.
3. Wipe down the seam with tack cloth to remove the dust created by the sanding.
4. Refill the joint until the dried putty is even with the adjoining pieces of beadboard.

Which is cheaper beadboard or shiplap?

Although, beadboard is more versatile, they are more expensive and labor intensive and time consuming, when it comes to installation. Shiplap boards are fairly easy to install as the planks simply interlock with their adjacent planks.

Is beadboard still popular?

Our designers expect wall treatments will continue to grow in popularity, such as beadboard (wood paneling with vertical lines instead of horizontal), picture molding, and shiplap plank styles. White on white, or tone on tone, for treatments and molding is on trend right now.

Can you run beadboard horizontal?

Like board and batten wainscoting, beadboard wainscoting or paneling can be installed vertically (the traditional orientation), or horizontally for a more modern feel.

Does beadboard need to be painted?

Both types of beadboard may be pre-painted at the factory or when installed. If your beadboard paneling is pre-painted, then it may have a sheen that must be removed so that a new coat of paint will adhere properly.

Can you put beadboard on the ceiling?

A beadboard ceiling can be used to level out an uneven ceiling by adding shims. Although beadboard is typically thought of as a wall material, it’s great for ceilings as well, and it’s relatively inexpensive. By using tongue and groove beadboard, you can hide the nails for cottage feel with a seamless look.