How to reset a rv comfort zc?

How do you reset an RV comfort ZC thermostat?

1. Press 00 on your RV comfort ZC thermostat;
2. Switch the thermostat in Off position, remove the fuse for five minutes then plug it in again;
3. If the above solutions don’t work, disconnect all power from the RV then connect 12V power to fuse.

What’s the code for RV comfort ZC Zone 2?

Have RV Comfort ZC wall mounted thermostat (series 9000) dual zone. For Zone 2 have code 1 10. A/C for zone 2 tries to turn on, fan runs, the compressor starts, cools for serval minutes then shuts down and displays code 1 10.

How to fix RV comfort thermostat ZC problem?

A friend had that problem last week, unplugged the thermostat for a 5 minutes, in OFF reconnect, wait 5 minutes then move switch to COOL. That fixed his. Thermostat Reset with 00 code. Switch in Off position; Remove fuse for 5 minutes; plug fuse in & wait 5 minutes; Move switch to Cool.

Are there any problems with RV Comfort Control?

What I have paid could have replaced the air conditioners and furnaces with something that works. Not sure you have the same issue, but the common problem many of us had with the RV Comfort Control.zc thermostat from that era was its digital display would lock up with 00 showing.

Why is my Camping World comfort thermostat not working?

After installation, the Zone 2 rear AC unit, and Zone 1middle AC unit began working properly, but not the front AC unit. The following week, the Camping World AC tech found that the 12V connections under the front AC unit had corroded (I had him check the other two). Thus it appears I had two problems.

Have RV Comfort ZC wall mounted thermostat (series 9000) dual zone. For Zone 2 have code 1 10. A/C for zone 2 tries to turn on, fan runs, the compressor starts, cools for serval minutes then shuts down and displays code 1 10.

What’s the problem with my rvcomfort ZC thermostat?

My Thermostat (RVComfort.zc) controls all thee. My problem is: I am locked on Zone 1. I cannot switch to zone 2 or 3. I can set the Temp. but zone on … read more I have a 2003 Fleetwood Providence. The RVComfort.ZC thermostat has for several years about once a week gone to 00 in the temperature part of the LCD.

What I have paid could have replaced the air conditioners and furnaces with something that works. Not sure you have the same issue, but the common problem many of us had with the RV Comfort Control.zc thermostat from that era was its digital display would lock up with 00 showing.

What is the zone for Coleman RV comfort?

I have a Coleman RV Comfort.ZC thermostat with two furnaces and two AC units attatched. ZOne 1 and ZOne 2. Thermostat reads ZOne 2 (working) and ZOne 4?