As tight as you can go will probably snap the porcelain (with a good socket you can torque a nut onto a bolt quite a bit). Until you think it’s about to snap is just guessing. Snug. No movement.

How tight should toilet tank screws be?

As tight as you can go will probably snap the porcelain (with a good socket you can torque a nut onto a bolt quite a bit). Until you think it’s about to snap is just guessing. Snug. No movement.

Why is my toilet leaking from the bolts?

A toilet that leaks from its tank bolts is usually leaking because of damaged, misaligned or even cracked washers or bolts. … Washers or spacers also sit between the tank and the bowl, and a washer made out of a metal, rubber or plastic is placed on the bolt between the bowl and the nut.

Is toilet tank supposed to wobble?

If the tank is wobbling, then there is possibly a loose bolt in the tank that keeps it attached to the bowl. In this case, you need to tighten them up a little bit. You don’t want them too tight as it could be difficult to remove or even start to crack the tank itself.

What causes a toilet to rock back and forth?

One of the most common things that causes a toilet to rock back and forth are loose flange bolts. These are the bolts that hold the toilet down at an even level with the floor in your bathroom. … A toilet does not screw directly into the ground. Instead, it screws into what’s called a toilet flange, or a closet flange.

What size are the nuts on a toilet tank?

The stainless steel nuts and washers are also included for complete replacement of all old hardware. Tank Bolts are proven durable, and the 5/16” size x 2 ¾” length will fit most brands and models. Repair your rocking toilet tank with new toilet bolts.

Are toilet tank bolts universal?

Are Toilet Tank Bolts Sizes Standard? Toilet tank bolts help to seal your toilet tank such that it does not leak. They are durable and often in the same sizes and lengths. More often, toilet tank bolts are standard and will fit most types of toilet tanks.

Should toilets be caulked?

Caulk keeps your toilet secure the floor, and avoids any chance of injury or toilet malfunctioning. It’s actually required by the International Plumbing Code to caulk a toilet to the floor, and now knowing the reasoning behind it, why would you not want to?

How long do toilet tank gaskets last?

The wax keeps water from leaking as it passes from the toilet to the drain pipe. It also seals against foul sewer gas odors. A wax seal will often last the life of the toilet, 20 or 30 years, without needing to be changed.

How do you tighten a toilet without cracking it?

Because porcelain toilets are relatively brittle, it’s important to tighten toilet tank bolts carefully. The best way to do so is to hand-tighten the nuts on the tank bolts, then use a wrench to make a quarter-turn on each nut. Once you’ve done this, check to see if the tank wobbles or leaks.

Article first time published on

Will any toilet tank fit on any toilet?

When asking the question is a toilet tank universal, the short answer is no. While in certain brands they can be interchangeable, the overall consensus is that your toilet tank is fitted to your toilet model. When looking to purchase a new tank, you need to learn the measurements and model number.

What thread size are toilet bolts?

Install the Threaded Adapters Onto the Toilet Bolts A set of replacement toilet caps typically includes two different sets of threaded adapters: 1/4 inch and 5/16 inch. The 1/4-inch size is the more standard. Thread an adapter onto each toilet bolt with the notches of the adapter on the bottom.

How far apart are toilet flange bolts?

The job of the toilet bolt is to help create a watertight seal between the toilet bowl and the toilet flange and to secure the toilet to the floor. There are three possible measurement distances you can get from the wall to the toilet bolt: 10 inches, 12 inches, or 14 inches. The most common is 12 inches.

Are tank to bowl bolts universal?

Manufactured in a high quality, chlorine resistant rubber, the Korky tank to bowl gaskets are universal to fit most toilet tanks.

Why is the bottom of my toilet tank leaking?

One reason for a toilet leak from the base might be a loose connection where the tank meets the toilet. … Shut off the water at the valve, then flush and hold the handle until all the water has drained from the tank. Remove the old bolts and washers. Clean and dry the area, then install new washers and bolts.

How do you know if toilet seal is leaking?

The telltale sign of wax ring failure is water leaking out from around the base of the toilet. You might also notice a toilet feeling unusually wobbly if the wax ring is coming loose.

Why does my new toilet wobble?

More often than not, the wobble is caused by loose toilet bolts, but the flange may also be responsible. It may be corroded, broken or set too high. Moreover, the person who installed the toilet may have used a wax ring that is too thick. … If you can’t get the toilet to stop wobbling, loosen the nuts and remove them.

Do you need to silicone around a toilet?

Caulk keeps the toilet secure Caulk keeps your toilet secure the floor, and avoids any chance of injury or toilet malfunctioning. It’s actually required by the International Plumbing Code to caulk a toilet to the floor, and now knowing the reasoning behind it, why would you not want to?

What's the difference between caulk and silicone?

Caulking is a sealant but is fairly rigid when dry, which makes it ideal for sealing gaps or seams in areas with minimal contraction and expansion. … Silicone sealants, on the other hand, remain flexible for years which make them ideal for areas that are prone to expansion and contraction.

How often should you change the wax ring on a toilet?

In theory, the wax ring “should” last the lifetime of the toilet, or certainly 20 to 30 years.

How do you clean toilet caulk?

To remove silicone caulk traces, dip the pad in mineral spirits. Open the windows for ventilation and don’t introduce any flames into the room while working with mineral spirits. Wipe the surfaces with a damp cloth, and then dry them with a dry cloth.