How does Jayco slide out re syncing work?

Press the mode button on the controller six times and hold on the seventh for five seconds to enter electronic manual override mode. 2. Use the extend/retract switch to move both motors in or out. NOTE: Over-current and short circuit detection are disabled. Electronic manual override provides 12V directly to both motors. 3.

What’s the Upside of being a Jayco dealer?

While miles away from a Jayco dealer we ended up having to deal with it ourselves. The upside with having to deal with random issues is you gain more knowledge about the everyday things. This also leads to being less nervous about operating something gently because it might pack up and you don’t understand it.

What to do if your Onan controller won’t start?

Go to the genset and use the switch on the set itself. Press ‘Stop’ 3 times within 5 seconds. The light in the switch will start flashing. If the light flashes 3 times, pauses for 3 seconds, and flashes 3 more times, press and immediately release ‘Stop’ one more time. This will put the controller into Fault Read Mode.

How to stop Onan genset 3 times on Start button?

We need to see what that secondary code is. Go to the genset and use the switch on the set itself. Press ‘Stop’ 3 times within 5 seconds. The light in the switch will start flashing. If the light flashes 3 times, pauses for 3 seconds, and flashes 3 more times, press and immediately release ‘Stop’ one more time.

How to turn OFF Auto Sync on Jayco slide out?

Electronic Manual Override (Controllers C-1 and C-2 Only) NOTE: See (Fig. 5) for locations of the mode button and LEDs. 1. Press the mode button on the controller six times and hold on the seventh for five seconds to enter electronic manual override mode. 2. Use the extend/retract switch to move both motors in or out.

What happens when a Jayco slide out is fully in?

The controller senses the extra current demand and this signals that the slide out is either fully out or fully in. The controller then shuts off the current to the motors and engages the locking mechanism.

Is the Jayco fold down camper going away?

In an email from Doug Moats, Jayco’s communication and public relations manager, the company mentioned how the decision for its Jay Sport line is temporary and production will continue once demand is in place. “Jay Sport is not going away,” Moats told RV PRO. “Fold down campers and their popularity helped build this company.”