How do you measure RV landing gear?

The sure way to pick out replacement landing gear for a trailer that will bolt right up to the current brackets is to measure the distance between the mounting brackets (underside of top bracket to top of lower bracket as shown in the diagram) if it is 17-1/2 inches then the # LC333964 would fit.

How do you measure landing?

Measuring the landing is nearly the same as measuring the hall, measure its length and width at its longest and widest points using the same principle as for the hall (allowing for doors/drop backs). Except that you will need an additional measure called the “over the step” measure or o/s for short.

How to troubleshoot a fifth wheel landing gear problem?

I’m troubleshooting a landing gear problem on a fifth wheel. When I extend the landing gear the motor seems to make a skipping sound and has a hard time raising the trailer. I’m trying to determine if there is a gear box problem or a motor problem. I believe the legs are not bent, and there is no rear end jacks down.

Why does my fifth wheel slide out not work?

Check out the following common problems with slide-outs on a fifth wheel. A faulty motor or gearbox could be the problem if your RV slide-out gear system is motor-driven. In such cases, if the motor is faulty or breaks down, then the mechanism will not work.

Where to buy new fifth wheel landing legs?

We stopped in at a nice RV park called Maverick Ranch in Lajitas, Texas, leaving the truck hooked up and I ordered up some new legs from Etrailer.com. I had used them in the past and was very pleased with their parts quality and customer service. They had replacements in stock from Stromberg Carlson priced at $134 each.

How do you retract a landing gear motor?

If you have moved the motor after attaching the gearbox to the leg, ensure that both legs are the same length before proceeding. Measure the distance from the frame to the lower end of the sliding section on the opposite leg, and extend or retract the leg with the motor attached to match. 8.

What kind of landing gear does a 5th wheel trailer use?

It is an item thats related to the 5th wheel trailer and specifically landing gear. So those of you who are familiar with 5th wheel trailers know that there’s basically two types of landing gear. Hydraulic and electric.

What to do about broken fifth wheel landing leg?

I surmised that a small metal pin needed to be punched out to get the ball rolling sort of speak. Sure enough, once I punched out the pin on the top beveled gear and another below the larger lower beveled gear, the rest of the mechanism could be easily taken apart exposing the long worm gear.

Why does my landing gear not work when lowering the trailer?

In the same way, any jack – even a manual hand-crank type – requires less power (or force) when lowering the trailer than when lifting it. The cause for your powered landing gear losing steam could be any of several possibilities.

What was the problem with my fifth wheel?

The passenger side landing jack on our Keystone Cougar fifth wheel suffered a major failure last week. I was in the process of jacking the trailer off the truck when I heard and felt a loud clunk. In fact, my wife who was inside setting things up immediately looked out the window and ask “What the heck was that?”.