The Daily Pulse.

Your source for accurate, unbiased news and insightful analysis

science

How do you fix a separated nylon tooth zipper?

By Ava Hall |

How do you fix a separated nylon tooth zipper?

3 Ways to Fix a Stuck Zipper

  1. Use a graphite pencil. To fix a stuck zipper, start with a graphite pencil.
  2. Use bar soap or wax. Try using a lubricating substance like a bar of soap, some chapstick, or lip balm to make the teeth easier to slide through.
  3. Use petroleum jelly. When all else fails, you can use petroleum jelly.

Why does my slide out Stick after 8 inches?

If your other slides operate quickly and this one sticks for the first 8 inches, it sounds like there is something that is rubbing or sticking when the slide first starts in. The fact that it moves in normally after the first eight inches suggests that the motor is working well. You haven’t indicated what model and year motor home you have.

What does it mean when slide outs don’t slide?

This will indicate whether the problem may be the batteries or not. If you push the button for the slide outs and can hear the motor running but the slides don’t move, check the motor’s shear pins. Although it’s pretty rare, there’s a chance they could both be broken.

Is it OK to operate drivers side slide?

My owner`s manual states that you should NOT operate the slides until the motor home is level to avoid binding and other damage to the slides. Also, I found out the hard way that the drivers side slide has a motor control board that is riveted upside down in the motor compartment.

Why is my slide out motor not working?

RV Slide Motor not Working. The bad news is that one of your slide out motors may have died. The good news is that the failure is due to a faulty wire or connection which caused a short and tripped a breaker. The latter may not be the case if you have 2 motors on your slide out and one is still working.

Why does my slide not retract all the way?

However, Ian says the most common one is out of sync slide-out electrical motors. If the motors are out of sync, the slide may not move at all. Othertimes just one side may move, which will cause a bind in the gears and not allow it to retract or extend all of the way.

What happens if you push the slide out button?

If you push your slide-out button and nothing happens, double check to make sure that the path of the slide out is unobstructed. A stray item wedged in your slide out can be an easy fix, so go check before tearing your motorhome apart looking for the slide motor.

What to do when slide outs don’t move?

Make sure the house batteries are charged completely, or if at all possible, plug your RV into shore power. This will indicate whether the problem may be the batteries or not. If you push the button for the slide outs and can hear the motor running but the slides don’t move, check the motor’s shear pins.

RV Slide Motor not Working. The bad news is that one of your slide out motors may have died. The good news is that the failure is due to a faulty wire or connection which caused a short and tripped a breaker. The latter may not be the case if you have 2 motors on your slide out and one is still working.