Locate the adjuster on one wheel. … Move the lever from the notch it’s in by pulling the lever toward the wheel. … Repeat this process for the other three wheels.Double-check that all four wheels have been set at the same height after you’ve finished adjusting them.

How do you adjust the height on a Craftsman riding lawn mower?

Locate the attachment lift lever on the right side of the steering wheel. Press down on the plunger at the top of the lever, and move the lever forward to raise the mower deck or backward to lower it.

How do I increase the height of my riding lawn mower?

In order to increase your lawn mower height, adjust the lever next to each wheel one notch towards the rear of the mower. Move the lever as many notches to the correct cutting height you desire. If you move the lever towards the front of the mower, you will lower the lawn mower height.

How do you lower the blade on a Craftsman lawn mower?

Grasp the attachment lift lever on your right side with your right hand. Find the plunger at the top of the attachment lift lever. Press the plunger inward with your thumb, and move the attachment lift lever back, or toward you, to lower the cutting blade.

How do you maintain a Craftsman lawn mower?

Clean air and oil are critical in keeping a mower’s engine working properly. Sears recommends checking the oil level before each use. Change the oil after every 25 hours of use, and change both the oil filter and oil after every 50 hours of use. Clean the air filter after 25 hours of use.

What is included in a riding mower tune up?

The three main components involved in a mower tune-up are the air filter, spark plug and oil, all of which must be changed. The needed parts and supplies can be found at home centers and hardware stores. Start by changing the oil.

How do you adjust a carburetor on a lawn mower?

Adjust the High Speed Mixture Some carburetors may not have this adjustment option, based on the manufacturer or carburetor’s age. Remove the air filter cover, filter and cartridge to access the carburetor. Start the engine and allow it to run for 5 minutes to warm, then stop the engine.

What height should grass be cut in summer?

A mowing height between 2.5 to 3 inches is best for most of the season, except during summer stresses when the lawn mowing height should be raised one-half inch to mow at 3 to 3.5 inches. Raising the mowing height provides more insulation from summer heat and reduces water loss from your soil.

What height should a lawn mower be set at?

A lawn should be mowed at 3 inches or taller. The ideal mowing height would be 3 inches to 3.5 inches in height.

Is 4 inches too tall for grass?

For the healthiest and most sustainable approach, Michigan State University Extension says 3.5 to 4 inches is most desirable. Lawns mowed at 3.5 or 4 inches out-compete weeds, tolerate grubs and look just as good as lawns mowed at 2.5 inches.

Article first time published on

Can you lower a lawn mower?

Lowering Lawn Mower Blades Riding mowers usually have their height adjustment levers or knobs on the left side by the seat. Simply pull the lever toward the back or turn the knob counterclockwise. Whenever you are adjusting lawn mower blade height levers, be sure that they lock into position before proceeding.

Can you adjust the height of a push mower?

Place the push mower over a level surface. Locate the height adjustment lever on each wheel. The lever will be between the side of the mower deck and the inside of each wheel. … Gas mowers will have adjustment levers on all four wheels while many electric mowers have a single knob to raise and lower the mower deck.

Why does my Craftsman riding mower cut uneven?

If your riding lawn mower is cutting the grass unevenly, start by checking the pattern of the cut. … Blade vibration also causes an uneven cut. To eliminate vibration, replace unbalanced blades and worn mandrels. Replace a worn blade belt because a worn belt won’t spin the blades correctly.

What is the lowest setting on a lawn mower?

If you don’t know what kind of grass you have, a good rule of thumb is to cut it at three inches or down to a minimum of 2 ½”, never removing more than one third of the grass blade at a time. Understanding your model of lawn mower and how your lawn mower height settings work is important if you want to use it properly.

How often should I change the oil on my Craftsman riding lawn mower?

Craftsman advises to change the oil in your riding lawn mower every 50 hours of operation or every season, whichever comes first.

Where do you grease a Craftsman riding lawn mower?

Grease fitting locations include the pulley and spindle bearings on the mower deck, the front wheel axles and the steering column. Remove and clean the filter at least once per month.

How do you adjust the carburetor on a Craftsman lawn mower?

Turn the idle speed screw counterclockwise one to two turns beyond where the screw contacts the throttle plate. The idle speed and idle mixture adjustment screws are next to each other on the side of the carburetor; the main mixture adjustment is on top.

Why is my lawn mower idling high?

Carburetor Adjustment A carburetor that’s incorrectly adjusted is a common cause of poor engine idling that results in hunting and surging. Fortunately, most lawnmowers have two screws that allow you to adjust the carburetor yourself. One screw controls the idle speed while the other adjusts the idle mixture.

How often does a lawn mower need a tune up?

Every lawn tractor and riding lawn mower needs a tune-up at least once a year. It’s an easy task that’ll take you 30 minutes or less.

How much does it cost to tune up a riding lawn mower?

The average lawn tractor or yard tractor tune-up is around $225 to $250.

Can all lawn mowers be adjusted?

All four wheels adjust with one lever on most electric models. Some models may have a dial on the top of the mower to turn to a larger or smaller number. Mow a small patch of grass in an inconspicuous area of your lawn.

Is a push mower deck height supposed to be the same at the front and back?

Lawn mower deck pitch, or sometimes referred to as, “rake,” is the tilt of the mower deck from front to back. … For most effective results, a lawn mower deck should have a pitch, or height difference of 1/8-inch to 1/2-inch between the front of the deck to the back of the deck.

Can you cut your grass too high?

Allow all grasses to grow taller in summer and during drought. Mow warm-season turf shorter in spring to remove dead grass blades. Mow cool-season grasses shorter for the final fall mowing in snow prone regions to help prevent snow mold. Allow grasses growing in shade to grow taller.

What time of day should you mow your lawn?

For a healthy, beautiful yard, the best time of day to mow the lawn is mid-morning or late-afternoon. The temperature is not too hot and the grass has had enough time to dry from the previous night’s dew. Avoid mowing the lawn during the early morning, midday, or evening.

Is it better to leave grass long or short for winter?

What’s the best grass height for winter? Ultimately, your lawn should be about 2 to 2 ½ inches high by wintertime. That’s the “sweet spot” because it’s not too tall to invite snow mold, but not too short to be stressed out by cold weather. … Spread the trims out, so you condition the lawn to withstand a shorter height.

Is it better to keep grass long or short?

The shorter it is, the less food that will be produced by the plant. A longer grass blade will shade the ground underneath, keeping it cooler, meaning it won’t dry our as quickly as when the lawn is mowed short. In other words, the lawn does not have to receive as much supplemental water. Reduces weed growth.