How do I fix the sound on my Sansui TV

Press the “Menu” button on your remote control or the TV’s control panel and select the “Audio” icon. Verify that HDMI1 Audio, HDMI or DVI is set to the correct source and turned on if you have a device connected to that TV input. Set the TV Speaker setting to “Off” if you have an audio system connected to the TV.

Why does my Sansui TV not have sound?

Can you connect TV to external speakers?

If your TV doesn’t use RCA connectors for audio output, it may have a headphone out port (3.5mm port). You can use this to connect your TV to the speakers. They’re the same connector used on phones, tablets, laptops, etc. For this, you’ll need to use a 3.5mm audio jack on the TV end and a RCA jack on the speaker end.

Why does my TV suddenly have no sound?

Check the audio settings on your TV and connected devices. Turn off and unplug your TV and connected devices. Inspect the TV cables and ports, then check the ones on your devices as well. … Swap out the media device for another one, or change the TV’s speaker output to the internal speakers to see if it fixes the sound.

Why is my Sansui TV not turning on?

Troubleshooting Basic Sansui TV Issues If your TV won’t power on, look for a flashing light. … First, unplug the TV, then press the power button and hold it for 10 seconds. Release the button and plug the TV back in, then press the power button once.

How do I unmute my TV?

Using the remote, press the volume up button to increase the volume level of the TV or press the Mute button to unmute the TV.

How do I fix the volume on my TV?

Double Check Mute.
Turn Up Volume.
Reboot The TV.
Check For Secondary Audio Protocol.
TV Audio Input Settings.
Switch The TV Channel.
Check Headphone Port.
Check Connection Cables.

How do you connect speakers?

Turn off the A/V receiver.
Connect the speaker wires to the speaker terminals on the rear of the A/V stereo receiver. IMPORTANT: …
Connect the other end of the speaker wires to the corresponding speakers.

Why is the sound not working when HDMI to TV?

Disconnect the HDMI cable from the HDMI input of the TV and connect the source device to a different TV. … If there is still no sound, perform a power reset on the TV . If there is still no sound after power resetting the TV, replace the HDMI cable.

How do I connect speakers to my Smart TV?

Turn on both your TV and the compatible Bluetooth-enabled speaker, soundbar, audio system, or headphones. …
Go into your TV’s audio setup menu, select Bluetooth and start the pairing process.
Wait for confirmation that the TV and sound system are paired.

Article first time published on

How do you fix a TV with sound but no picture?

Factory Reset. Carry out a factory reset on the TV using the RESET option. …
Disable power saver mode. Check your TV settings to see if it is on power saver mode. …
Change the HDMI Cable. …
TV Power Board Replacement. …
Check the TV installation.

How do you start a Sansui TV?

Turn on the television using the “Power” button on the remote control. Press the “Menu” button on the remote to bring up the main menu for your Sansui. Use the “Up” and “Down” arrows to navigate to the “Setup” option and then press the “Right” arrow to select it.

How can I make my TV louder?

Often, the best way to improve your TV’s sound is to bypass its internal speakers completely and opt for an external set. There are two ways to connect external speakers depending on your TV’s capability: using a cable (3.5mm audio or digital) or, if you have support for it, using the HDMI Audio Return Channel (ARC).

How do I reboot my TV?

Point the remote control to the illumination LED or status LED and press and hold the POWER button of the remote control for about 5 seconds, or until a message Power off appears. …
The TV should restart automatically. …
TV reset operation is complete.

How do I reset my TV?

Turn on the TV.
Press the HOME button on the remote control.
Select Settings.
The next steps will depend on your TV menu options: Select Device Preferences — Reset. …
Select Factory data reset or Reset.
Select Erase Everything. …
Select Yes.

Why does my directv have no sound?

The sound issues may be caused by the remote control being set to MUTE or audio/visual cables not being connected securely. Or, especially if you have pets, cables may be damaged and not working properly. Check the remote control – Press the volume up button on the remote control.

How do I fix no sound on my Roku TV?

Check your remote volume. Press the volume up and mute buttons. …
Make sure your speakers are on. …
Disable audio leveling. …
Turn off private listening in the Roku mobile app. …
Check your Wi-Fi connection. …
Look for a system update. …
Restart your Roku TV. …
Check all your Roku channels.

How do I get sound on my TV with HDMI?

Set the audio output setting of the source device to output a compatible audio signal. IMPORTANT: If using a set-top box, make sure the volume is turned up on the set-top box. You also may need to go into the set-top box menu and select HDMI in the Audio Settings or Audio Coding section to pass the audio to the TV.

How do I get my TV to play sound through HDMI?

Right-click on the sound volume icon in the lower right corner of Windows. A context menu will pop up.
Click Playback devices.
In the Playback tab, select Digital Output Device or HDMI option. Click Set Default and click OK.

How do I get sound on my TV with HDMI cable?

Right-click the volume control icon on the bottom taskbar and click on “Playback Devices” to open the pop-up window for sound options. In the “Playback” tab, select “Digital Output Device” or “HDMI” as the default device, click “Set Default” and click “OK” to save the changes.

How do I connect speaker wires to my TV?

At the rear of your TV or cable box, find the color-coded audio output jacks. …
Plug the red RCA audio cable into your TV’s red RCA audio jack and plug the white RCA audio cable into your white RCA audio jack. …
Switch on your TV and, one by one, check each speaker.

What is audio cable?

A cable used to transfer analog or digital signals from an audio source to an amplifier or powered speaker. Cables are identified more by their plugs and sockets than by the shape or color of the wire that is used. See analog audio and audio connections. Analog Mini-Phone (Headphone Cable)

How can I tell if my speakers are wired?

Speaker polarity is determined when connecting the wires between the amplifier and the speaker. When the positive amplifier terminal is connected to the positive speaker terminal and the negative amplifier terminal is connected to the negative speaker terminal, the speaker will be in correct polarity.

How does speaker wire work?

Speaker cables connect the outputs of the power amplifier or the amplifier section of the receiver to the speaker. These cables carry the high-powered electrical currents required to move the internal components of the speaker (the magnets that move the drivers).

Does my TV have Bluetooth?

If you have an Android TV, press the help button on your remote control to access your settings. Then you want to go to Status and Diagnostics or Troubleshooting and System Information and select System Information.

What is digital audio output?

A digital audio out refers to an audio output on a TV, Blu-ray player, game console – or any other AV device that creates sound. This output will send stereo or 5.1 surround sound audio to an amplifier, home theater system or soundbar. There are two main types of digital audio out – optical and coaxial.

How do I factory reset my Sansui?

Restore with hard reset or Recovery mode Sansui Play 1- First turn off your Sansui Play completely. If you can not unlock the screen, press and hold the power button for about 20 seconds and the phone will turn off. 2- Keep holding on volume down and power keys together for a few seconds in your Sansui Play.

How do I reset my TV without a remote?

Simultaneously press and hold down the Power and volume Down (-) buttons on the TV (not on the remote), and then (while holding the buttons down) plug the AC power cord back in. Continue to hold the buttons down until the green LED light appears.

What is the code for a Sansui TV?

Sansui television remote code 20695 These codes are compatible with Universal remotes and Sansui televisions that have a functioning infrared device. How to use a dish network remote control to use a Sansui TV: 1-Point the dish remote at the tv. 2-Press and hold the tv button at the top till all 4 lights lite up.

What happens when TV screen goes black?

This would mean that either a CABLE BOX, SAT BOX, COAX CABLE, HDMI CABLE, ETC may not be working properly, something is loose, or needs reset. -Reset ALL components by unplugging them for 5 minutes including the TV. -Be sure all COAX CABLES and HDMI CABLES are tight and properly connected.

How do I fix my TV when the screen goes black?

Unplug the power cord from your digital box, wait for 30 seconds, then plug it in again. Wait until the box has fully powered on again, then see if the picture has returned. If that doesn’t fix it, If you have an HDMI cable connected to your TV, you could try an HDMI handshake.