How do I connect my Jensen JHD40BT Bluetooth?

Bluetooth enabled device is pairing mode….

1. Make sure the device is on and ready to receive a signal from the JHD40BT. With the.
2. When the Bluetooth device has completed it’s search, the mobile phone will display the. Bluetooth device name (JHD40BT).
3. Select JHD40BT. The BT AUDIO icon ( ) on the radio LCD will display.

How do I pair my phone with Jensen MS3A?

With the MS3A in Bluetooth Audio mode, press and hold the MODE (8) button. 2. Repeatedly press MODE until the unit displays PAIR ON, then press ►||/MUTE. The unit will display PAIR and count down from 120 to 0.

How do I pair Jensen JHD910BT?

Make sure the device is on and ready to receive a signal from the JHD910BT.

1. Press and hold the AUDIO/MENU button (12) for more than three seconds to enter menu.
2. Press the AUDIO/MENU button repeatedly until the “BT PAIR” option is displayed.
3. Press the VOL+ button (10) to begin searching for BT devices.

How does jwm9a work on a Jensen radio?

Turned the battery back on (fully charged battery), turned Jensen radio on, selected Bluetooth mode, made sure my phone Bluetooth was on, held down Enter for 3 seconds, got Pairing message on radio – held breath – JWM9A appeared as new device on my phone, selected it and – viola – beautiful music throughout my [email protected]! Thanks!!

How to get Jensen radio to pair with Bluetooth?

Now press and hold the menu button to enter system setup. Press menu until Bluetooth device shows up and press enter to select. Now press and hold enter to get it to seek your device. Go to your phone and select JWM9A under Bluetooth This is the only way that I can get it to pair when the normal method does not work.

Why does my Jensen radio not connect to my iPhone?

If that still doesn’t work, you may have a repair issue with your Jensen. The way that I get my iPhone to connect when it is stubborn is to first select source and press until Bluetooth is highlighted then choose it by pressing enter. Now press and hold the menu button to enter system setup.

Why does my Jensen coach not work with Bluetooth?

If it’s possible, you could try cutting all of the power to the Jensen, then try again. Not sure how you could do that other than to shut down your electric (e.g. unplugged from 110 volt), then hit your battery disconnect so all power is shut off from the coach.