For example, if you are floating a bookshelf, typically your shelf won’t need to be deeper than 10″ since most books are less than 9″ deep. If you are floating kitchen shelves, 12″ usually works since most cabinets and the plates, cups, and bowls they house, are 12″ or less deep.

How deep can a shelf be?

1. The shelves shouldn’t be too deep. The standard depth of most shelves is 16 to 20 inches deep. The highest shelf should be shallower, like 12 inches deep, to make those items easier to access.

How deep should built in shelves be?

Most shelves are built a minimum of 11 to 12 inches deep, but this is your chance to customize: Go for it!

How thick does a floating shelf have to be?

The wood for a floating shelf should be hardwood and at least 2 inches thick to make up for the lack of supports for it.

How deep should a wall shelf be?

As far as shelf size, a depth of 10 or 12 inches fits most functions without concern of drooping in the middle, while length should be determined based on where you want to install yours. If you want a long span but are concerned about weight, install adjacent, identical floating shelves, or opt for bracket supports.

How deep should kitchen open shelves be?

Open shelving in a kitchen should be deep enough to hold a stack of dinner plates which are typically 12″ deep. This is also the perfect minimum depth for displaying cookbooks. Measure your daily essentials that you plan to display in your kitchen and plan from there.

How deep should floating shelf brackets be?

Typical shelf depths are 12” for kitchen, 10” for living room/bookshelves. A 3/4” diameter rod will handle both with ease. Using smaller rods like 5/8″ or 1/2″ means you wont be able to go as deep, or hold as much. Using larger diameter rods means you can go deeper.

How deep are living room built ins?

The base can be fitted with drawers or doors to conceal electronics and accessories. Cabinetmaker Stewart True of True Carpentry and Cabinetry in Cummings, Georgia, says 36 inches is a good height for a base, while 20 to 24 inches is a good depth — deep enough for board games and electronics.

How thick should Wood be for shelves?

Use 3/4-inch thick materials for shelves and bookcase structure. If you’re using hardwood solids, it’s OK to boost the thickness to 1 1/4 inch for almost unlimited support. This type of shelf looks more like a mantel and is expensive, but adds the opulent look of craftsmanship.

What is the depth of built in cabinets?

Depth is generally 24″ including the faceframe and back. If I’m building a cabinet with butt joints, a face frame and a back attached directly onto the back of the cabinet (not set into dados), I cut my sides and shelves at 23″ deep.

Article first time published on

Should floating shelves be same depth as cabinets?

Those are best in a bathroom or hallway. For kitchens, you want to have a depth of at least 10 inches. This is important if you want to store dinner plates or other wider items on your shelving.

How far apart should floating shelves be?

The rule of thumb for spacing is 12 inches between each shelf but bump that up to 15 or 18 inches and you enhance that sense of exposure and accessibility.

How much weight can you put on floating shelves?

For every stud your bracket is attached to, your floating shelf can hold 50lbs. That means if you’ve got a three foot shelf attached to two studs, your shelf can safely hold 100 lbs. If you’ve got a two foot shelf attached to two studs, the same goes — it can hold 100 lbs.

What kind of hardware do you use for floating shelves?

Ideally, you should attach floating shelves (or anything else you’re hanging) to a wall stud, as this will give you the most supportive base for your project. A stud finder—a hand-held device that uses a magnet to detect metal, such as the nails and screws in the wall studs of your home—can help you locate these.

How much does it cost to build floating shelves?

Approximate Total Cost: $10 The DIY Wood Floating Shelf can be made for about $10 in materials cost. This is the cost for the wood, wood finish, and other basic supplies. *Note: This doesn’t include smaller things you may already have around the shop, including: glue, sandpaper, etc.

How much weight can a kitchen shelf hold?

The average adjustable shelf, when equipped with metal clips, is rated at 100 pounds. Shelves with plastic clips are rated at no more than 40 pounds.

What type of wood is used for floating shelves?

Best Wood for Floating Shelves The best wood is any hardwood like solid walnut, oak, pine, maple or mahogany to name a few. Rough cut wood is more raw and will show some impurities. Finished or unfinished? some floating shelves will come finished with a stain or clear coat and some will come unfinished and paintable.

How long can a shelf be before it sags?

The eye will notice a deflection of 1/32 inch per running foot so that a fully loaded (70-80 pounds) bookshelf that is 3 feet wide, should sag no more than 3/32 inches. For most shelves made from 3/4 inch stock, a practical span is 30 to 36 inches.

How thick should plywood shelves be?

The most common size used in shelving is a 3/4 inch thickness. Cabinetry, furniture, and smaller decorative projects might generally use a combination of 1/2 and 3/4 and occasionally 1/4 inch.

How much are built in fireplaces?

The fireplace built-ins cost depends on the contractor you’re working with to perform the work, as well as where you live. The size of the wall where you’re building the feature also influences the cost of the fireplace built-ins. The average cost ranges from $2,500 to $6,800, according to happystartsathome.com.

How deep are cabinets around fireplace?

Upper cabinets are much less deep than lower cabinets — typically 12-15″ vs 24″ — and work much better for fireplace walls. We built a 4″ toe kick under each cabinet using 2x4s and installed new baseboards to make them look built in.

How tall should built ins be?

However, if you’re going to fill the shelves with books, movies, and board games in a basement playroom, you’ll want shelves that are easily accessible. In that case, bookshelves that are 72 to 80 inches tall will make them most functional.

How deep is an upper kitchen cabinet?

Standard wall cabinets (sometimes referred to as “upper cabinets”) are 12 inches deep; standard base (below-counter) cabinets are 24 inches deep.

What is the average space between shelves?

Average Shelf Spacing A good average spacing for shelves is between 8 and 12 inches. If you have oversize books to store, you might prefer to increase the spacing to 15 inches.

How far should floating shelves be above toilet?

A good rule of thumb is to plan on having at least 24″ between the top of the toilet tank and the bottom of your shelf. This should give you plenty of room to not hit your head, but it won’t feel awkwardly high.

How do you stagger 3 floating shelves?

When using three shelves, place the middle shelf higher or lower than the one on either side. Five shelves can be staggered with two or three higher than the others, alternating every other shelf for a horizontal grouping.