Top-loaders usually require you to wedge foam or cardboard between the drum and the case. For a front-loader, you’ll typically insert shipping bolts in the rear of the washer to secure the drum. If you no longer have the original locks, contact the manufacturer to purchase some.

Where are the shipping bolts on a top load washer?

Download a copy of the Installation Instructions. On models with a shipping rod, it is located on the right side panel, toward the bottom of the washer, between the front and rear legs. It is 23″ long and keeps the tub in place during shipping.

Do you need shipping bolts for washer?

Impact of Moving A Front Load Washer Without Shipping Bolts: You can fill it with the help of the furniture blankets. You can remove the power cord and drain hoses, then wrap the washer with some dolly straps and then load it onto the dolly or truck for transport.

Do LG top load washers have shipping bolts?

Answer Hello Tony, top load washers do not use shipping bolts , only front load washers do.

Do Whirlpool washers have shipping bolts?

The Front Load Washer Shipping Bolt Kit can be used whenever you need to move the appliance from one location to another. The kit includes (2) short bolts and (2) longer bolts that hold the wash tub and basket in place so that the washer can safely be transported without damage.

How do you transport a top-loading washing machine?

Transporting your washer: Place inlet hoses inside washer basket. Drape power cord and drain hose over the console and secure with masking tape. Place foam packing ring from original shipping materials back inside the washer. If you do not have a packing ring, place heavy blankets or towels into basket opening.

How do you transport a top loader washing machine?

For top-loading washers, you can protect the drum by inserting padded material like cardboard or foam between the drum and the case. It’s also recommended that you run your last load of laundry a few days before your move and that you leave the door open to allow it to dry completely before moving your machine.

How many shipping bolts does an LG washer have?

Note: This product has to be paired with the 4011FR3159E 4.75 inch shipping bolt (x2) for a total of 4 bolts on most LG washers.

Do all new washing machines have transit bolts?

Normally when you get your new washing machine there will be two (rare), three or four transit bolts fitted through the rear panel of the washing machine that fix to the outer tank of the washing machine. … These bolts must be removed before the washing machine is used.

Are shipping bolts necessary?

The shipping bolts keep the tub secure during a move and reduce the amount of vibration that could damage the suspension. If you do not have the necessary shipping bolts, you can purchase them through an appliance repair center.

Article first time published on

Can you lay a top load washer on its side?

It’s recommended you always keep a washing machine in an upright position. Laying a washer on its side can cause the inner and outer tubs to bump against each other, which can loosen support pads or damage the suspension. It can also cause the tubs to move out of alignment and alter the way your unit works.

How do you secure a washing machine for transport?

Preventing a washing machine’s drum from excessive motion during your move will protect the suspension from breaking. You can do this by securing the drum with shipping bolts or transit bolts. These metal rods are inserted into special slots in the rear of the washer to secure the drum.

What is transit bolts in washing machine?

Transit bolts are a type of bolt used to secure part of a mechanical appliance during transit. … The drum of a washing machine is weighted and would damage the electronic internals if it were to swing into them while being transported. Failing to remove transit bolts before using the machine can also damage the machine.

How do you move a Maytag front load washer?

Transporting your washer: Disconnect drain hose from drain system and from back of washer. Unplug power cord. Place inlet hoses and drain hose inside washer drum. Bundle power cord with a rubber band or cable tie to keep it from hanging onto the ground.

Can you transport a washing machine laying down?

Yes you can. But take precautions lest you damage the WM. Like a refrigerator (also a household equipment), it’s recommended you move a washing machine stood upright. If extreme conditions don’t permit, transport it laid on either of the sides which don’t have protruding water pipes.

Can you transport a new washing machine on its back?

When you move your washer, first replace the shipping bolts that were originally in the back of the washer. This keeps the drum from moving inside the washer and protects it from damage. Also, make sure your washer is placed in the moving van upright. Shipping your washer on its side, front, or back can damage it.

Does Maytag washer have shipping bolts?

The Front Load Washer Shipping Bolt Kit can be used whenever you need to move the appliance from one location to another. … The bolts attach on the rear of the appliance.

Do Indesit washing machines have transit bolts?

The most common example of transit bolts is the securing of the drum of a washing machine as it is transported to the desired location. This is a genuine spare part for select Ariston, Hotpoint and Indesit washing machines. …

What happens if you run a washer with shipping bolts?

The shipping bolts clamp the spring suspension system into a locked position and hence prevent it from being damaged during transit. If you don’t remove them, it will have no suspension system so will vibrate VERY badly when you run it. It will likely be pretty noisy.

Do LG washers have shipping bolts?

The first are for shipping bolts attached to the rear of your washing machine. If the bolts are still there, remove them by using the wrench provided with your washer. Loosen the bolts by turning them counterclockwise. … LG front load washers are shipped with a foam block in the base to support the tub during shipping.

Where are the shipping bolts located on a Samsung washer?

Your Samsung Front Load Washing Machine comes with shipping bolts inserted into the back of the machine to keep the tub secure during transportation.